Sonoma GT 0334 - Build Pics
- Thread starter Syborg Twin Turbo
- Start date
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
actually it's going to be heading to the interior shop with no Drive shaft.
Once it gets back to Chicago it will hit the dyno for tuning
So... when it's finished, is it going to get pushed first? or driven first?:lol:
actually it's going to be heading to the interior shop with no Drive shaft.
Once it gets back to Chicago it will hit the dyno for tuning
Syclone#1992
SyTy.net Moderator
Re: Sonoma GT 0334 - Build Pics
Who is doing the tuning on the truck, and what fuel management did you pick? BS3?
Who is doing the tuning on the truck, and what fuel management did you pick? BS3?
Syborg Twin Turbo
Syborg Twin Turbo
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Good Morning All,
This post is all the friends I've made on these Bulletin Boards.
It's amazing how many people where involved in creating the brake pedal for my truck.
First Person Involved was Rodger from Iron Works
Roger drew the original pedal arm for his C6-57 Project and yep he will be selling these.
Below is the link to the project:
http://www.lateral-g.net/forums/showthread.php4?t=12616
http://www.lateral-g.net/forums/showthread.php4?t=13039
http://www.lateral-g.net/forums/showthread.php4?t=7820
http://www.lateral-g.net/forums/showthread.php4?t=5034
http://www.lateral-g.net/forums/showthread.php4?t=4788
http://www.lateral-g.net/forums/showthread.php4?t=4353
http://www.lateral-g.net/forums/showthread.php4?t=4023
www.ironworksspeedandkustom.com
Then Shannon from www.modoinnovations.com stepped in -- pardon the pun
and sent us one of his really cool brake pedals.
Not to worry were going to give him the pedal back.
Then Ron Wilson from www.hoodpins.net stepped in and made the modification to Rogers Pedal Design.
If you need to have cad files created this is something Ron can do. hoodpins@hughes.net
Our goal was to make the pedal arm look similar to the Lokar Gas Pedal
and yes we will be using Shannons Gas Pedal
First Ron created the pedal pad and made it look similar to Shannon's Pedal.
Then Ron made the modifications to the Pedal Arm.
So now we have Brake Arm that matches the Lokar Gas Pedal
and a Brake Pad that will match Shannon's Brake Pad.
Good Morning All,
This post is all the friends I've made on these Bulletin Boards.
It's amazing how many people where involved in creating the brake pedal for my truck.
First Person Involved was Rodger from Iron Works
Roger drew the original pedal arm for his C6-57 Project and yep he will be selling these.
Below is the link to the project:
http://www.lateral-g.net/forums/showthread.php4?t=12616
http://www.lateral-g.net/forums/showthread.php4?t=13039
http://www.lateral-g.net/forums/showthread.php4?t=7820
http://www.lateral-g.net/forums/showthread.php4?t=5034
http://www.lateral-g.net/forums/showthread.php4?t=4788
http://www.lateral-g.net/forums/showthread.php4?t=4353
http://www.lateral-g.net/forums/showthread.php4?t=4023
www.ironworksspeedandkustom.com
Then Shannon from www.modoinnovations.com stepped in -- pardon the pun
and sent us one of his really cool brake pedals.
Not to worry were going to give him the pedal back.
Then Ron Wilson from www.hoodpins.net stepped in and made the modification to Rogers Pedal Design.
If you need to have cad files created this is something Ron can do. hoodpins@hughes.net
Our goal was to make the pedal arm look similar to the Lokar Gas Pedal
and yes we will be using Shannons Gas Pedal
First Ron created the pedal pad and made it look similar to Shannon's Pedal.
Then Ron made the modifications to the Pedal Arm.
So now we have Brake Arm that matches the Lokar Gas Pedal
and a Brake Pad that will match Shannon's Brake Pad.
Last edited:
midnightbluS10
Banned
Re: Sonoma GT 0334 - Build Pics
Wow! Lotsa work for a single pedal. :tup:
When are you picking up Sy 0334? lol :squint:
Wow! Lotsa work for a single pedal. :tup:
When are you picking up Sy 0334? lol :squint:
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Yep, sure was a boat load of work.
Sy 0334 - I remember seeing it 4-sale a couple years ago. I wonder what happened to it ???
Yep, sure was a boat load of work.
Sy 0334 - I remember seeing it 4-sale a couple years ago. I wonder what happened to it ???
JSM
Active member
Re: Sonoma GT 0334 - Build Pics
http://www.syty.net/forums/showthread.php?t=64242
looks like you can have another chance to get it.
You could use it as a daily driver, and confuse everybody when you say you drove 334 to work today, or parked it in the front row at the grocery store.
http://www.syty.net/forums/showthread.php?t=64242
looks like you can have another chance to get it.
You could use it as a daily driver, and confuse everybody when you say you drove 334 to work today, or parked it in the front row at the grocery store.
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
I should have bought it when it was closer to home.
For Know I am going to consult on a Satin Black Syclone project with a very good friend.
I should have bought it when it was closer to home.
For Know I am going to consult on a Satin Black Syclone project with a very good friend.
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Good Morning All,
Kenny sent the Valve cover back for the last time.
I took them over to Dennis High Speed Welding - he added a couple bungs on the back of the valve covers.
Just in Case.
www.highspeedwelding.com
Kenny was even good enough to tell us exactly where he wanted the bungs.
Intake Tube looking nasty - man this thing needs some paint.
Now all three pieces are in Rich Miltons hands getting cleaned up.
Rich is going to smooth the Valve covers & intake tube.
Once he's done with them he will hand them over to Bob Thrash so he can work his magic.
Good Morning All,
Kenny sent the Valve cover back for the last time.
I took them over to Dennis High Speed Welding - he added a couple bungs on the back of the valve covers.
Just in Case.
www.highspeedwelding.com
Kenny was even good enough to tell us exactly where he wanted the bungs.
Intake Tube looking nasty - man this thing needs some paint.
Now all three pieces are in Rich Miltons hands getting cleaned up.
Rich is going to smooth the Valve covers & intake tube.
Once he's done with them he will hand them over to Bob Thrash so he can work his magic.
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
It's been a long weekend.
Some of you may already know that Kenny was injured over the weekend at a Rock Crawling event.
He was ejected from the vehicle as it rolled over landing on him crushing his skull.
He was life flighted to St John Hospital in Tulsa, OK where they put over 20 plates and more then 30 screws in his head. They had to removed some of his brain tissue that was exposed to prevent infection. They feel that the loss of brain tissue shouldn't be a problem.
He also suffered a Fractured Cheak Bone, Broken Foot & Ruptured Ear Drum.
It has been a trying couple days for the family but it seems like Kenny is doing incredibly good actually better then they expected. So good that this morning he was able to eat breakfast and they will be moving him out of ICU.
At this point and time it doesn't appear that he has any problems.
It is a miracle that he is alive and doing so good all I ask is that everyone please say a prayer for Kenny and his family.
There are a bunch of people sending Kenny T-shirts & magazines as a get well wish and if you would like to do the same you can send them to:
Travis Ball
13821 toepfer rd
garfield, Ar 72732
I am sure he would appreciate it.
It's been a long weekend.
Some of you may already know that Kenny was injured over the weekend at a Rock Crawling event.
He was ejected from the vehicle as it rolled over landing on him crushing his skull.
He was life flighted to St John Hospital in Tulsa, OK where they put over 20 plates and more then 30 screws in his head. They had to removed some of his brain tissue that was exposed to prevent infection. They feel that the loss of brain tissue shouldn't be a problem.
He also suffered a Fractured Cheak Bone, Broken Foot & Ruptured Ear Drum.
It has been a trying couple days for the family but it seems like Kenny is doing incredibly good actually better then they expected. So good that this morning he was able to eat breakfast and they will be moving him out of ICU.
At this point and time it doesn't appear that he has any problems.
It is a miracle that he is alive and doing so good all I ask is that everyone please say a prayer for Kenny and his family.
There are a bunch of people sending Kenny T-shirts & magazines as a get well wish and if you would like to do the same you can send them to:
Travis Ball
13821 toepfer rd
garfield, Ar 72732
I am sure he would appreciate it.
Last edited:
WyoSyclone
Active member
Re: Sonoma GT 0334 - Build Pics
That news made my stomach turn over a couple of times Marty... what a miracle that he is still alive and doing as well as he is.... thanks for letting us know so that we can send our get well wishes to him.
That news made my stomach turn over a couple of times Marty... what a miracle that he is still alive and doing as well as he is.... thanks for letting us know so that we can send our get well wishes to him.
BigBadSmoosh
Picking fights on I-65 since 2013
Re: Sonoma GT 0334 - Build Pics
very sorry to hear this, hopefully he makes a full recovery and i wish the best for him and his family.
very sorry to hear this, hopefully he makes a full recovery and i wish the best for him and his family.
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Good Morning All,
Well, I have good -- No, I have GREAT News Kenny is home resting with his family.
So since he's home I figure I would continue updating all of the hard he has been doing on the truck.
The AAW Wiring harness installed and almost complete in this picture.
One of the best features is that all of the wires dead head at the fuse panel.
This helps to keeps all of the wiring super clean under the dash and makes for an easy install.
The Sparco seats installed in the truck.
The seat cushion is going to take a little work but they may work.
More pictures of the Dash wiring.
Air Ride Controller -- waiting for a home in the Center console.
We have plenty of update that I can share between now and Christmas so keep watching the BB's.
I also want to thank everyone that kept Kenny and his family in there thoughts and prayers this past week.
It has really meant a lot to them and everyone close to them.
Life has taught me one thing people may come and go in your life but great friend are irreplaceable
and I look forward to being able to call Kenny when I'm bored at work just to see what's going on.
Good Morning All,
Well, I have good -- No, I have GREAT News Kenny is home resting with his family.
So since he's home I figure I would continue updating all of the hard he has been doing on the truck.
The AAW Wiring harness installed and almost complete in this picture.
One of the best features is that all of the wires dead head at the fuse panel.
This helps to keeps all of the wiring super clean under the dash and makes for an easy install.
The Sparco seats installed in the truck.
The seat cushion is going to take a little work but they may work.
More pictures of the Dash wiring.
Air Ride Controller -- waiting for a home in the Center console.
We have plenty of update that I can share between now and Christmas so keep watching the BB's.
I also want to thank everyone that kept Kenny and his family in there thoughts and prayers this past week.
It has really meant a lot to them and everyone close to them.
Life has taught me one thing people may come and go in your life but great friend are irreplaceable
and I look forward to being able to call Kenny when I'm bored at work just to see what's going on.
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Good afternoon All,
Taking everyone way back to May 26,2006 for this picture.
Dave from Comp Fab did the Sheetmetal Dash Conversion
www.comfab.com
I did the designed layout for the quages.
Then Doc over at Docs Kustom cut the custom Dash Panel.
www.docskustom.com
All the Guages sit at different heights instead just being flush mounted.
Kenny put the Dash in for the last time on his watch.
Remember these ?
Just wait till you see them in the dash !!
Kenny fit all of the guages in the Dash Panel
I just can't wait to sit behind the wheel and look at the dash.
While I was walking the floor at Sema I ran into Steve at Twistmachines.
www.twistmachine.com
Steve has some pretty cool Products - One that I just had to have.
Steve is now offering these Trick Billet Guage Bezels
Just one more trick Part to Set off the Interior.
plenty more pics to come next week.
Good afternoon All,
Taking everyone way back to May 26,2006 for this picture.
Dave from Comp Fab did the Sheetmetal Dash Conversion
www.comfab.com
I did the designed layout for the quages.
Then Doc over at Docs Kustom cut the custom Dash Panel.
www.docskustom.com
All the Guages sit at different heights instead just being flush mounted.
Kenny put the Dash in for the last time on his watch.
Remember these ?
Just wait till you see them in the dash !!
Kenny fit all of the guages in the Dash Panel
I just can't wait to sit behind the wheel and look at the dash.
While I was walking the floor at Sema I ran into Steve at Twistmachines.
www.twistmachine.com
Steve has some pretty cool Products - One that I just had to have.
Steve is now offering these Trick Billet Guage Bezels
Just one more trick Part to Set off the Interior.
plenty more pics to come next week.
midnightbluS10
Banned
Re: Sonoma GT 0334 - Build Pics
Nice! They look like the ported shrouds on turbos.
Nice! They look like the ported shrouds on turbos.
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Good Morning All,
Nitrous Express sent us there Easy to Install Nitrous Chiller
http://nitrousexpress.com/
I'm looking forward to installing this on the truck.
Kenny's new Table
Just in case you unclear as to what this was ????
Please don't tell Bob Thrash about this.
Good Morning All,
Nitrous Express sent us there Easy to Install Nitrous Chiller
http://nitrousexpress.com/
I'm looking forward to installing this on the truck.
Kenny's new Table
Just in case you unclear as to what this was ????
Please don't tell Bob Thrash about this.