DanenGraham
Big in the rear
SOLD
Selling the motor out of my truck. About 10K miles, built botom end, vortecs. Dont really have any good pictures right now, but i will be pulling it out i hope this weekend.
Asking $2000 for everything
EDIT: price is without shipping or paypal fees
This motor has had not the best life, a local shop built the long block for me and at 1500-2000 miles the front main fell off. Anyway I put new bearings in, and the crank was check with a dial indicator and it was still fine. Replaced the front and rear seals and it has been good for 8K miles or so.
It has had an oil leak from day one, have never really found where its coming from. Thought it was the rear main but it looks fine the 3 times i have check. And even when i replaced it it looked fine. Could be the oil pan as the valve covers are always dry as well.
The center crank bolt threads were damaged when removing the pully, and i think i may have helicoiled it but not sure. I know it pissed me off, so it may need a new crank or care taken when messing with the pully but that would be cheap to replace.
Complete-- Intake to oilpan
upper and lower intake
Trottle body
vortecs
412 cam
SRP (or speed pro cant remember) forged pistons
Eagle H-beam rods
2 bolt main
stock crank .010 under.
double roller timing chain
1.5 roller rockers Magnums -- new springs for the setup
I will have the intercooler, 50# injectors, injector harness, fuel rails, and all the brackets for A/C, steering pump, Alt, as well for sale and may include them in this sale for the right price. Im not sure what to ask for this. I was thinking $1500 but that sounds a little low as just some vortecs are for sale for around $1000. So im starting at $2000 OBO, i am willing to talk it over.
I may also end up parting this out, im going to try and add up some prices of parts but i dont really want to mess with it.
Selling the motor out of my truck. About 10K miles, built botom end, vortecs. Dont really have any good pictures right now, but i will be pulling it out i hope this weekend.
Asking $2000 for everything
EDIT: price is without shipping or paypal fees
This motor has had not the best life, a local shop built the long block for me and at 1500-2000 miles the front main fell off. Anyway I put new bearings in, and the crank was check with a dial indicator and it was still fine. Replaced the front and rear seals and it has been good for 8K miles or so.
It has had an oil leak from day one, have never really found where its coming from. Thought it was the rear main but it looks fine the 3 times i have check. And even when i replaced it it looked fine. Could be the oil pan as the valve covers are always dry as well.
The center crank bolt threads were damaged when removing the pully, and i think i may have helicoiled it but not sure. I know it pissed me off, so it may need a new crank or care taken when messing with the pully but that would be cheap to replace.
Complete-- Intake to oilpan
upper and lower intake
Trottle body
vortecs
412 cam
SRP (or speed pro cant remember) forged pistons
Eagle H-beam rods
2 bolt main
stock crank .010 under.
double roller timing chain
1.5 roller rockers Magnums -- new springs for the setup
I will have the intercooler, 50# injectors, injector harness, fuel rails, and all the brackets for A/C, steering pump, Alt, as well for sale and may include them in this sale for the right price. Im not sure what to ask for this. I was thinking $1500 but that sounds a little low as just some vortecs are for sale for around $1000. So im starting at $2000 OBO, i am willing to talk it over.
I may also end up parting this out, im going to try and add up some prices of parts but i dont really want to mess with it.
Last edited:
