RenzFab WrenchFest - Saturday May 2nd, 2009

BigBadSmoosh

BigBadSmoosh

Picking fights on I-65 since 2013
Re: RenzFab WrenchFest - Saturday May 2nd, 2009

flatscreen tv can go on the flat wall to the right..

at the least you need a decent sound system
 
ziembic

ziembic

Donating Member
Re: RenzFab WrenchFest - Saturday May 2nd, 2009

SY-1193 said:
Matt,
Looking very nice!

Here is an idea for the TV setup you need for the place.

http://www.engadget.com/2008/06/19/comcast-centers-video-wall-packs-10-million-pixels-into-27-x-87/

It should fit...

Damn dude...all that nice work just to attract people there to work on Mike's POS trucks???...So you don't have to?
When is the next Wrenchfest???
Click to expand...

Ya, the tv costs 22 million dollars. I think if he could afford that then the 4 door typhoon would be his daily driver.
 
phoonTy

phoonTy

Truckless. For now.
mattw

mattw

Active member
Re: RenzFab WrenchFest - Saturday May 2nd, 2009

I can't compete with those big dollar setups but I do just happen to have this 2400 lumens projector laying around:

921_Projector.jpg


That I plan to project onto this wall which will be finished in drywall:

917_Projector%20Wall.jpg


I also have this old stereo setup that includes an extra amp donated by Renz:

918_Stereo.jpg


And four speakers like this that will go in every corner:

919_Speaker.jpg
 
phoonTy

phoonTy

Truckless. For now.
Re: RenzFab WrenchFest - Saturday May 2nd, 2009

You sir, have your bases covered. :lol: :lol:

That setup is killer! Someday. . .
 
mattw

mattw

Active member
Re: RenzFab WrenchFest - Saturday May 2nd, 2009

Cleaned out the newly poured area and climbed a ladder to take a pic..

922_New%20area%20picked%20up.jpg


Thats the general location of where the lift will go but we will probably move it away from the wall some..
 
mattw

mattw

Active member
Re: RenzFab WrenchFest - Saturday May 2nd, 2009

Today my dad did a ton of wiring and I made a new lower tray for the lift..

923_Old%20and%20New%20lift%20tray.JPG


Tomorrow we are hanging drywall..
 
sy381

sy381

Member
Re: RenzFab WrenchFest - Saturday May 2nd, 2009

That new tray for the lift looks a heck of alot better than the one we dug off the floor! Awsome work
 
mattw

mattw

Active member
Re: RenzFab WrenchFest - Saturday May 2nd, 2009

The lift is now fully operational..

925_Lift%20Operational.JPG


Now we just need to push one of Renz's POS trucks on it and raise it all the way up to test things out...
 
SY-1193

SY-1193

Active member
Re: RenzFab WrenchFest - Saturday May 2nd, 2009

When you test the lift keep your fingers away...remember Mike's possessed truck likes to roll over on peoples fingers.
 
mattw

mattw

Active member
Re: RenzFab WrenchFest - Saturday May 2nd, 2009

We got all of the lights working and added switches so you no longer have to flip breakers to turn the lights on and off:

926_All%20lights%20working.jpg


We also built a removable cover for the pit. In addition to this cover we are going to build a removable chain railing to prevent any accidental falls..

927_Cover%20for%20pit.jpg
 
M

MikeRenz

not stock
Re: RenzFab WrenchFest - Saturday May 2nd, 2009

looks like its time to bring the TT over and tighten it all up :tup:
 
SY-1193

SY-1193

Active member
Re: RenzFab WrenchFest - Saturday May 2nd, 2009

BRIGHT LIGHTS!!!!
mmm....now all you need is a dyno!

Looking great! :tup:
 
ziembic

ziembic

Donating Member
Re: RenzFab WrenchFest - Saturday May 2nd, 2009

SY-1193 said:
BRIGHT LIGHTS!!!!
mmm....now all you need is a dyno!

Looking great! :tup:
Click to expand...

First its a 22 million dollar tv and now it is a dyno. Keith,your good at spending other peoples money...but then again who isn't?
 
You must log in or register to reply here.
Top