quick question

[vettandtyphoon]

hey guys,

when i went out to the track last weekend. one of the time slips read as below
60' = 1.70
1/8 7.58 @ 92 mph
1000' = 9.92
1/4 = 11.9 @ 113

does that seem about right on the big end of the track? or should the mph get UP there more?

 

[vettandtyphoon]

Re: quick question

ttt anybody???

hey guys,

when i went out to the track last weekend. one of the time slips read as below
60' = 1.70
1/8 7.58 @ 92 mph
1000' = 9.92
1/4 = 11.9 @ 113

does that seem about right on the big end of the track? or should the mph get UP there more?

 

[1madgumby]

Re: quick question

thats about right. pretty close..

 

[bezerk]

Re: quick question

yeah, sounds about right., i got 115mph with 12.2 with no traction to start with 60ft was 1.8

 

[STORM TROOPER]

Re: quick question

yep thats right:tup:

 

[Don W.]

Re: quick question

Checking my logs that looks very close to what I've run all the way through. I wuz getting a couple more MPH at the big end so, based on the build in the sig, there's some more there?

Good run though. :tup:

 

[sharkbait]

Re: quick question

one of my vegas ran 11.70@117mph. i think your right around there.

 

[turbodig]

Re: quick question

I dug up an old (2004) slip:

60 - 1.66
330 4.784
330 MPH 90.73
660 7.476
990 9.758
1/4 11.835
MPH 111.11


This may have been a lift, but I don't see a dial-in on the slip so I don't think so.

Your MPH is about right, I'd say. Might pick up some if you lock the converter.