vortecfiero
New member
mockup pics
more to come (It takes forever to scan these!)
more to come (It takes forever to scan these!)
project update (pics fixed)
- Thread starter vortecfiero
- Start date
J
jtz
Guest
Now, THAT's how they should have come from the factory!!!
You are going to have some fun on the streets...make sure you have someone riding shotgun to video the fun :wink:
Jay
You are going to have some fun on the streets...make sure you have someone riding shotgun to video the fun :wink:
Jay
Captain Morgan
Moderated User
thats totally awesome. i cant wait for the post "i turned the key" 
that thing should be fun as hell to drive. Lookin good man ::thumbsup::
that thing should be fun as hell to drive. Lookin good man ::thumbsup::
Syclone#1992
SyTy.net Moderator
When you get your pictures developed, ask for a photo CD, it costs a little extra, but is faster and better than scanning them.
BTW looks great, that thing is going to be a fast son of a bitch.
BTW looks great, that thing is going to be a fast son of a bitch.
J
jtz
Guest
Are you going to have Nolan tune it? Let me know if you are looking for a digital camera, my 'lil brother runs a large camera store :wink:
Jay
Jay
vortecfiero
New member
Daron said:
ya... cheap scotch
vortecfiero
New member
V said:
Ive got an adjustable one. the pipe misses the adjustment set screw
and there is over .5" clearance from the nipple to the pipe
but ya custom fuel rails are on my to make list
FYI, I would not use that nitrile rubber connector at the TB.
It is meant for low vacuum conditions, aka pre-turbo intake, not pressurized situations post turbo.
Best bet is to get one of the Vortec/Paxton TPI aluminum pieces for the supercharged apps. I've seen 'em in Jegs/Summit for $50-70 I believe.
Looks like a T3 variant turbo, from the SVO mustang stuff ? What kinda boost you gonna be running?
Header design looks nifty. Good luck with it all, looks like it'll be a fun vehicle.
It is meant for low vacuum conditions, aka pre-turbo intake, not pressurized situations post turbo.
Best bet is to get one of the Vortec/Paxton TPI aluminum pieces for the supercharged apps. I've seen 'em in Jegs/Summit for $50-70 I believe.
Looks like a T3 variant turbo, from the SVO mustang stuff ? What kinda boost you gonna be running?
Header design looks nifty. Good luck with it all, looks like it'll be a fun vehicle.
vortecfiero
New member
I agree... but for 10 bucks...
Im going to run 4 to 7lbs to get it on the road and test out my custom engine mounts etc.
then this winter I'll spent real dollars and time to hook up the inter cooler etc
I believe its a big T03 turbine with special innards and T04B compressor also with special innards
thanks "we're not worthy!"
you might remember my post on building them (I cant find it )
more pics to come
vortecfiero
New member
TurboManiacal
Donating Member
red X's anybody else in aisle 4?
vortecfiero
New member
Sigo said:
no red x's on this side of the planet ! j/k
I think cardomain, where my pics are, was down for about 1/2 hour tonight
TurboManiacal
Donating Member
vortecfiero said:
I saw your other pics and not these...
It's either that or you uploaded Survivor Spoiler Pics and labeled them as Turbo Fiero pics in order to trick me (again) and this is god protecting me.
vortecfiero
New member
Sigo said:
rotfl !!
I just spilled my Canadian Domestic Beverage (6%) on the table !
(Im hot for cub scout lady)
TurboManiacal
Donating Member
We watched tonight the fact that the skinny Ryan guy (see sig) got deleted from the "roster".