project badazty

Re: project badazty

Is it a 92 or a 93? Carfax said that was invalid and gave this as a possible correct VIN...1GDCT18Z7P0810079 and that it's a 93 :dunno:
 

foxracin23

New member
Re: project badazty

Is it a 92 or a 93? Carfax said that was invalid and gave this as a possible correct VIN...1GDCT18Z7P0810079 and that it's a 93 :dunno:

my md state title says its a 93 and it has the X looking steering wheel which they did in 93 i think so has to be a 93 from what i kno
 

foxracin23

New member
Re: project badazty

yea its sucks it has a new vin from ny state but i couldnt pass up the deal for the truck.

also right now iam drawing up ideas for a 4 link rear coil over kit and if it comes out right might be forsale. i do alot of airride and custom fabracation so will deff be a badazz setup
 

foxracin23

New member
Re: project badazty

well got a good bit done got my insurance, tags, new vin number, hooked e-fan up but not workin will mess with tomm at work, drained n did trans filter and not soooo good had pretty nice sizes of alum. in the pan, temp gauge works when it wants to then stays down around 115 doesnt seem normal, all i need right now is belt fan working n my damn gauge lights. also a box under center console i unplugged was clickin makin the doors lock and unlock by their self
 

gstacky

Member
Re: project badazty

Check your grounds in the engine compartment, sounds like you may have one not hooked up, and they control the gauge panel and may be your problem there with the temp gauge and lights.
 

foxracin23

New member
Re: project badazty

found out the problem is that someone installed those inglo gauges they are silver and light up blue green yea they are gone now **** that shit. but man there is a rats nest of wires under the dash also my floor pan is my inner fender ill be fixing that realllly soon

i need a pic of the fuse panel need to kno which fuses belong where and which wires belong where
 

foxracin23

New member
Re: project badazty

ok well got bigger problem leaking oil out of turbo i think. the other day mad smoke coming out of the exhaust pipe and around turbo not sure if its the turbo or head gasket but just incase.

whats some good pistons n rods and what not iam goin to rebuild the whole motor
 

foxracin23

New member
Re: project badazty

well hope to be pullin the truck in the garage this weekend or next weekend to take the head off and check out the gaskets i have the motor taken down to the heads but with the last 3 weeks off snow havent moved it into the garage
 

foxracin23

New member
Re: project badazty

well finally got her in the garage iam going to replace some thing in the motor except the rods and pistons any suggestions on what all parts i should order so far found the roller rockers and thats it part numbers if you have them also thanks

tygarage.jpg
 

foxracin23

New member
Re: project badazty

iam going to replace some thing in the motor except the rods and pistons any suggestions on what all parts i should order so far found the roller rockers and thats it part numbers if you have them also thanks
 

foxracin23

New member
Re: project badazty

Wow thats ambition. You must be a mechanic or have a relation with one?

no not a mechanic at all i paint cars for a living and iam good friends with about 7 mechanics but all this done by myself they going to help make sure it goes back together right tho
 

foxracin23

New member
Re: project badazty

yeaa. well just got back in from the garage right now just trying to put all my damn tools where they belong and cleaning up the engine and engine bay scrubbing off every bit of grease i can get to with a tooth brush
 
Top