syclone383
New member
Re: Post Up Your Engine Bay picture...
Mike
Sy 0383
Mike
Sy 0383
Post Up Your Engine Bay picture...
- Thread starter ShuggsRR
- Start date
PPI Typhoon
DIY Madman
Re: Post Up Your Engine Bay picture...
Typhoonracer
Old Guard GURU
Re: Post Up Your Engine Bay picture...
OK not the cleanest but, a little simple green will do the trick!
OK not the cleanest but, a little simple green will do the trick!
autoaddictions
Active member
Re: Post Up Your Engine Bay picture...
What gives with that downpipe!! Somebody got lazey i think.
Typhoonracer said:OK not the cleanest but, a little simple green will do the trick!
What gives with that downpipe!! Somebody got lazey i think.
Typhoonracer
Old Guard GURU
Re: Post Up Your Engine Bay picture...
The downpipe gives.....
V- band clamp comes off, push the flex pipe up, and spark plugs 2, 4, &6 are right there.
The Stainless Steel flex piping is also 3.25" id so i get a little more area.
Heck it already ran 11.4 @121 (before the GTQ72, 512 cam, 1.6 roller rockers...)
The downpipe gives.....
V- band clamp comes off, push the flex pipe up, and spark plugs 2, 4, &6 are right there.
The Stainless Steel flex piping is also 3.25" id so i get a little more area.
Heck it already ran 11.4 @121 (before the GTQ72, 512 cam, 1.6 roller rockers...)
James Thomas
"NO CLASS"
Re: Post Up Your Engine Bay picture...
Actually, that stainless flex pipe with v-bands on both ends may be slick for service access on that side..... Hmmm.
__________
James
Actually, that stainless flex pipe with v-bands on both ends may be slick for service access on that side..... Hmmm.
__________
James
Typhoonracer
Old Guard GURU
Re: Post Up Your Engine Bay picture...
I only have a v-band on the turbo end....
but it flexs right out of the way when i undo it.....
I only have a v-band on the turbo end....
but it flexs right out of the way when i undo it.....
Syclone0565
CustomMulticades.com
Re: Post Up Your Engine Bay picture...
Syclone0565
CustomMulticades.com
Re: Post Up Your Engine Bay picture...
:roll: I know, It could have been. Just got the truck back today with the new cage installed. Heading to the track this week to see what it will do now
I am pulling it to the NATS though with the Denali. I will be in the same caravan as M. Hardman, J. Scott, Dobrick, and the Dunc. See you there man. :tup:
MikeRenz said:
:roll: I know, It could have been. Just got the truck back today with the new cage installed. Heading to the track this week to see what it will do now
I am pulling it to the NATS though with the Denali. I will be in the same caravan as M. Hardman, J. Scott, Dobrick, and the Dunc. See you there man. :tup:
warmpancakes
New member
Re: Post Up Your Engine Bay picture...
E what are all the relays behind the filter for?
E what are all the relays behind the filter for?
Re: Post Up Your Engine Bay picture...
its not mine i just work on it.
1 relay for the ECU (low impedance drivers)
2 relays for the electric cooling fans (temp switch in intake manifold)
1 relay for the fuel pump voltage booster (based on manifold pressure)
e
MikeRenz said:
its not mine i just work on it.
warmpancakes said:
1 relay for the ECU (low impedance drivers)
2 relays for the electric cooling fans (temp switch in intake manifold)
1 relay for the fuel pump voltage booster (based on manifold pressure)
e
