Need help with HHP valve kit install

[Maxtor]

Can anyone provide some detail for installing Hartman's HHP racing valve kit (where does it go, and how it goes there)? Got the new converter in today but I'm not sure where these parts go. As far as the inner workings of the tranny go, I'm pretty useless.

I assume you access a valve port from the bottom with the pan off?

Thanks in advance for any help anyone can provide.

 

[Brian Hartman]

It's simple to put in. Just drop the pan and pull down your filter. You'll see a quarter sized bore 2" toward the driver's side of the drive. You'll see a snap ring up there. Notice that the snapring is on the second ledge up in the bore. You'll need to put it back in the same way. When you pop the snap ring, watch out for your face because the valve lineup is going to drop out. Swap the other parts in the order as they came out. Look at the instruction for a reference and mod the valve. Take a glob of Vaseline on each part as you feed them into the bore to help make them stick. After putting the parts all up in there again. Begin the snap ring in the bore. Use a 13 or 14 mm socket with a 6" extension as a ram rod to push the snap ring up into place on the second shelf. That's it.

Call me if you need more help.

 

[Loeryder]

I had this from back when.
Still haven't put mine in yet. Waiting for the 9/11 to go in all at once.

Brian you rock for coming up with superior parts and excellent service, just in case noones told ya lately, you are appreciated.

HTHs

 

[Brian Hartman]

Thanx Jas. I really appreciate it bro.

Make sure you don't do the grind on the TCC valve. Bad news for a High Performance desire.

Take care,

 

[Maxtor]

Thanks, Brian. It has been a PLEASURE doing business with you. Thank you for supporting our community - someone who stands with their product!