MISC sy/ty parts, cladding and blazer partout

s_blazin

Donating Member
pics upon request for any item.

i have multiples of some things

Call or text 503 851 3385




Wiring:
Sy ECM i think it has a capacitor that went bad inside or something. for parts or repair only $50

harness's are from a 92 ty, most interchange but a couple dont

Engine Harness $150

Headlight-foglight harness $75

Under dash harness with fuse panel $200

Under hood heater-A/C harness $25

Cruise control harness $25

Center console/gear selector harness $75

cluster pigtail $50

Ty interior/Fuel pump harness $50

Power mirror pigtail to switch $20




Engine:

Stock air box with K&N filter $50

$100 upper intercooler. SOLD

$100 lower intercooler. SOLD

$40 MINT battery tray

MINT manifolds and crossover $350 have bolts, heat shields and bolt keeper tin thingys NICE shape and no cracks SOLD





Interior:

Cluster with 78k has white faced gauges that are very old and yellowed and the mother board on the back is missing. parts only cluster $50 SOLD

Sy radio bezel. $25

Ty radio bezel. $25

Sy headlight switch panel. $25

Non ac heater selector $25

Ty headlight switch with rear defogger and rear wiper switches $25

rear view mirror $40

A/c heater selector $25

Door trim strips inside $10

rear carpet $50

rear cover that flips over seat when folded down with carpet $40

sun visors $40

single pillar pod $20

rear seat belts $30

gold console floor bracket no shifter 50

power mirror switch tested and works $15




Body:

Drivers door escutcheon $30

Ty side mirrors $50

black out tail light covers $10

$50 typhoon tail lights

Sy or s10 tail gate handle relocator kit for shaved tail gate handles $60

front bumper cover, NO support $450




Misc:

rear wiper motor with wiper and new blade $40

cable that locks key in column when not in neutral $50

some parts for rear load leveling system ??

Renz e-brake cable brackets for rear disc brake conversions $50

92 ty front diff with loc rite locker - $400 SOLD
---------------------------------------------------------------------------------------

INNOVATIVE MSBC ELECTRONIC BOOST CONTROLLER $425 shipped
includes the instruction manual


also including some various vacuum lines and fittings

what it can do:

The MSBC-1 has the following features:
• Six stage programmable boost control.
• Useful for street, dirt or drag race applications.
• 0-60 PSI target boost range for each stage (1 PSI increments).
• Up to 9 different Ramp settings to control how fast boost is allowed to build.
• Launch stage for drag racing.
• Shift input for automatic stage selection for drag racing.
• Front panel stage selection by driver for road or dirt use.
• Readout of actual boost during boost control.
• Two analog data recorder outputs – Actual boost level, Target boost level.
• Two solenoid drive outputs – One Increase boost output, one Decrease boost
output.
• Can be used with Single or Dual port waste gates.
• Uses electronic pressure sensor in manifold to monitor and control boost.
• Will force waste gate to produce preset target boost level even with air density,
load, or mechanical variations.
• Can be used with manifold pressure only or external pressure source for control

DSC03182.jpg


DSC03181.jpg



----------------------------------------------------------------------------------------------------------


I also have a brand new never used Exile Turbo electronic boost controller. It's basically the same exact controller with a few extra add ons.

$550 shipped


retail is $700

what it can do:

The MSBC-1 has the following features:
• Six stage programmable boost control.
• Useful for street, dirt or drag race applications.
• 0-80 PSI target boost range for each stage (1 PSI increments).
• Up to 18 different Ramp settings to control how fast boost is allowed to build.
• Launch stage for drag racing.
• Shift input for automatic stage selection for drag racing.
• 4 built-in timers for timed boost control.
• Front panel stage selection by driver for road or dirt use.
• Readout of actual boost during boost control.
• Built-In self test feature.
• Two analog data recorder outputs – Actual boost level, Target boost level.
• Two solenoid drive outputs – One Increase boost output, one Decrease boost
output.
• Can be used with Single or Dual port waste gates.
• Uses electronic pressure sensor in manifold to monitor and control boost.
• Will force waste gate to produce preset target boost level even with air density,
load, or mechanical variations.
• Can be used with manifold pressure only or external pressure source for control.

DSC03178.jpg


DSC03179.jpg


DSC03180.jpg




-----------------------------------------------------------------------------------------------------------



I am selling this Radar style Ultimate chip due to I do not have a stock turbo and this chip is for
Stock turbo, L35 heads, 50lb Injectors and 3 Bar map

It works fine, I'm still looking for the key. I have it somewhere, just haven't found it yet

Comes with the piggy back chip.

I'm also including all paper work I have for it. looks like its all here

$400




photo-95.jpg


photo-96.jpg



















EARLS PERFORMANCE PRODUCTS
HD TRANSMISSION COOLER. cheapest i've found is $270 from some off website, summit is $280

SELLING FOR $150
it has been used but the trans it was on did not fail nor did it ever have anything bad in the pan last week when i changed the filter.
i'm going with a different style cooler so this one is no longer of use to me. perfect working order.


Overall Height (in) 10.500 in.
Overall Width (in) 13.000 in.
Overall Thickness (in) 2.000 in

please note SUMMIT's pic is not an actual pic of the cooler, this one is not long and narrow like in the pic

http://www.summitracing.com/parts/EAR-43406ERL/
 
Last edited:

djwaggoner

New member
Re: sy/ty cladding and blazer partout

Re: sy/ty cladding and blazer partout

Are the rear bumper covers for the TY or the SY?
What are you asking for them?
Thanx,
David
 

s_blazin

Donating Member
Re: sy/ty cladding and blazer partout

Re: sy/ty cladding and blazer partout

Are the rear bumper covers for the TY or the SY?
What are you asking for them?
Thanx,
David


prices now listed for some stuff, 250 each for rear bumpers with supports still on them

aren't sy and ty rear bumpers the same? i honestly don't know what they are from, i've had them for about 5 years and they've been in storage since i got them so i have no idea what they came off of.

and to everyone that was interested in the wheels, i'm really sorry but i forgot to ask about them when i was at pops place today. but i should be there again tomorrow so i'll ask.

they are his not mine i was just test fitting them, i forgot the sizes and i'll ask what he wants out of em
 
Last edited:

s_blazin

Donating Member
Re: sy/ty cladding and blazer partout

Re: sy/ty cladding and blazer partout

i hate holidays, the stupid shipping place took the day off today so for people wanting shipping quotes sorry i couldn't get them, i'll try again tomorrow
 

jwaller

Evil Genius/SyTy Guru
Re: sy/ty cladding and blazer partout

Re: sy/ty cladding and blazer partout

dash? I need one badly.

off the 94 I can take the core support, front fenders, air dam, hood if good with insulation, grill, front bumper with rubber molding, roof rack.
 

s_blazin

Donating Member
Re: sy/ty cladding and blazer partout

Re: sy/ty cladding and blazer partout

dash? I need one badly.

off the 94 I can take the core support, front fenders, air dam, hood if good with insulation, grill, front bumper with rubber molding, roof rack.

i have a dash in good shape, the core support is being held onto for my truck, but i DO know of a good one at the local wrecking yard, i think they want like 50 bucks for it.

left fender has a dent in it will need body work, if still interested i can get pics, or i may be able to find another one, but probably not the same color.

right fender is in pretty darn good shape, hood is also good and i believe the insulation is intact and in good shape.

i can also get an airdam at the wrecking yard since they cut this one up for stupid aftermarket fogs.

front bumper already went on my truck, but again i do believe there are a couple nice ones in the yard with molding and finally the roof rack can be yours if i can get it off in one peice, never pulled one before.

currently the truck is in the shop however the boss wants his shop back so i've actaully spent the past few days making it weather proof so it can sit outside until i get the problem with my garage condensating terribly bad, fixed.

so give me a bit of time to try and get the garage deal fixed and get it inside and i can tear it apart again.

the roof rack and yard items i can get to you before hand.

AT THE YARD

i will assume 50 for core support
25-35 for good front bumper
airdam will come with front bumper most likely but they may add like 10 bucks to it
and the dash i can get tomorrow (today i guess) from my pops place.



ON A SIDE NOTE I'M HAVING A TERRIBLE TIME WITH THE SHIPPING STORE.

THEY TRIED CHARGING ME 60 DOLLARS TO SHIP A PAIR OF DOOR PANELS.

SO I NEED TO LOOK FOR A DIFFERENT SHIPPING PLACE THAT WILL GIVE BETTER PRICES.

THANKS GUYS FOR BEING SO PATIENT
 

s_blazin

Donating Member
Re: sy/ty cladding and blazer partout

Re: sy/ty cladding and blazer partout

Edit:

Added more $hit to the list, see first post
 

jwaller

Evil Genius/SyTy Guru
Re: MISC sy/ty parts, cladding and blazer partout

I can get the stuff at a local yard as well I was just trying to send member some extra $$$.

please put me down for the dash and right fender(plus liner) and anything else you had on hand. it's going to be painted black anyway.
 

yudlose

New member
Re: MISC sy/ty parts, cladding and blazer partout

I'm interested in the rear bumper covers WITH supports. PM'd you.
 

Chest Rockwell

Active member
Re: MISC sy/ty parts, cladding and blazer partout

Is your dad interested in selling just the 18's? I'd prefer just them, but would consider all four if he doesn't want to split them up. Shipped to 98258.
 

s_blazin

Donating Member
Re: MISC sy/ty parts, cladding and blazer partout

I can get the stuff at a local yard as well I was just trying to send member some extra $$$.

please put me down for the dash and right fender(plus liner) and anything else you had on hand. it's going to be painted black anyway.

no prob, by liner you mean the inner fender? will get boxes and shipping quotes soon

Is your dad interested in selling just the 18's? I'd prefer just them, but would consider all four if he doesn't want to split them up. Shipped to 98258.

i doubt he'll wanna split them up, will get boxes and get shipping quotes shortly

Do you have the lower fan shroud from the blazer?

i'll check tonight and get back to ya
 

s_blazin

Donating Member
Re: MISC sy/ty parts, cladding and blazer partout

ok guys bear with me, i am new to shipping items as big as all these are so give me a bit of time please so i can try and get it all figured out.


if still available, can you also check on the door panels shipped to 78130?

there is one person waiting on a shipping quote for the panels, but i'll put you in behind them..
 

s_blazin

Donating Member
Re: MISC sy/ty parts, cladding and blazer partout

Any word on the wheels/tires?

no price yet, but i'm gonna run down to the local wheel shop to try and grab some boxes.

my grandmother passed away yesterday so things have been kinda crazy around here.

sorry to those waiting on me, lot of stuf going on lately
 

s_blazin

Donating Member
Re: MISC sy/ty parts, cladding and blazer partout

well there is another member that has first dibs but like i told him, i asked a couple times today what he wants out of em and didn't get any answers so if i can't get an answer by the end of the day tomorrow then i'll assume he's not to interested in selling em.
 
Top