ls turbo swap question!

[autoaddictions]

Im considering swaping out my stock block for a 6.0 lsx block with a single tubo. I dont know what size turbos some of you have used for this but im thinking a single 88mm. My question is,will i be able to fit a large enough down pipe between the block and frame rail? I think 4" will fit but might no sure its large enough to support over 1000 hp. If i go twin turbo it be 2- 3" down pipes but id prefer single. Oh BTW thres no AC.

 

[MikeRenz]

Re: ls turbo swap question!

robert fit 4"

 

[gt67sy]

Re: ls turbo swap question!

I know I've been told for my t-88 that is getting built right now for my 4.3 that they can't fit more the a 3.5 inside the frame rails

 

[jasonpickett]

Re: ls turbo swap question!

It all depends do you want to keep the inner fenders?

 

[Darin]

Re: ls turbo swap question!

You can buy a S400 with a T4 vband housing (3.5") for ~800us new.

 

[Captain Morgan]

Re: ls turbo swap question!

notch and box the frame

 

[eviltwin]

Re: ls turbo swap question!

you can fit it but you will have to cut the inner fender alot if your keeping a/c. i know i can fit one in my truck. it would be very very close though

 

[Try Me]

Re: ls turbo swap question!

I think I could clear 4 inch without much if any modification. I can take pics for you tomorrow I will be pulling my manifolds and everything off to send out for coating.