Lowering a Syclone in the rear

[syclone1100]

Re: Lowering a Syclone in the rear

Why are you going to spend $400+ on new leafs from Eaton when you can them for $160 from Summit??

are they leafs from summit or are they lowring blocks. and if thier leafs will they lower the back by 2 inches or are they just a stock replacment

 

[Ty0279]

Re: Lowering a Syclone in the rear

are they leafs from summit or are they lowring blocks. and if thier leafs will they lower the back by 2 inches or are they just a stock replacment

Yes, they are leaf springs.

Yes, they will drop the back 2 inches.

 

[dutchty]

Re: Lowering a Syclone in the rear

I've recieved a catalog of air ride technologies www.ridetech.com. because I'm looking for a better rear suspension for my TY it is not cheap but I think your getting something worth it.
The only thing is, its only for 2WD cars but they have a set called roadgreater which drop 12" for S-10 verhicles
maybe its interesting for you to ask for more infomation.

 

[syclonekid43]

Re: Lowering a Syclone in the rear

roadgrater is only for s-10 pick up's. you will need to cut the back half of the frame and bolt that in.
if you want a smooth ride and have it adjustable height. your best bet would be to 4-link it.
and mount the bags on either the lower bars or on top of the axle. larry at innovative makes a weld in and a bolt in kit for blazers. i am running his weld in kit on my 92 4dr blazer. www.innovativeairsuspension.com
you could also do air over leaf set up,but after time you will snap a leaf on there.

if you decide to mount the bags on the lower bars. you will need to run square tubbing. the round bar will just bent. you can also make your own kit from jason at suicide doors. the bars he uses are real beefy. www.suicidedoors.com

 

[leadfoot]

Re: Lowering a Syclone in the rear

I don't think the Bell techs springs are going to lower a syclone. Ask before you buy.

-Another route to consider is to de-arch what you already have.

Call a few spring shops for quotes.

 

[JAY]

Re: Lowering a Syclone in the rear

How do you lower the front?

 

[syclonekid43]

Re: Lowering a Syclone in the rear

with the torsion bar bolts.
i knowe beel tech makes 4x4 drop keys for blazers. not sure how they would work on a sy/ty. seeing they are lower from factory as it is

 

[TYRODD]

Re: Lowering a Syclone in the rear

BTW, the summit part# for the lowering springs is, BEL-5954... will fit Sy or Ty :tup:

$76.95 apiece.