LC-1 WideBand Install

Richie Rich

Richie Rich

New member
LC1 WIRING------------------------------ SYTY
1. Red ( 12V Supply ) ------------------ 12v Ignition Power
2. Blue (Heater Ground ) -------------- existing 02 sensor wire ground
3. White ( System ground ) ----------- B9
4. Yellow ( Analog Out 1 ) ------------- existing 02 sensor signal wire
5. Brown ( Analog out 2 ) --------------F14
6. Green ( Analog Ground ) -----------B9
7. Black (calibration Wire) ------------- LED / switch hook up[font=&quot][/font]

Here is what I have come up with. If I'm wrong please let me know. I think this will help all those that get confused as easy as I do. This might be nice to look at for quick install sheet. I will be installing my WB this weekend.

Thanks,
Rich
 
sy#2921

sy#2921

BAMF
Re: LC-1 WideBand Install

I would send the system ground to the existing o2 and heater ground to chassis ground and then the analog to the B9 pin
 
Richie Rich

Richie Rich

New member
Re: LC-1 WideBand Install

sy#2921 said:
I would send the system ground to the existing o2 and heater ground to chassis ground and then the analog to the B9 pin
Click to expand...

I thought that B9 is a ground not for a signal?
 
You must log in or register to reply here.
Top