ID These Ports Please

[DynaGlide]

I'm having a hard time remembering what all of these things go to. I've found some pictures of some of the fittings, but don't know for sure where they all go. I was wondering if someone could identify them,. and possibly tell me where they all go... lol.

Perhaps someone can take an existing picture and draw label the intake extensively for me. It's been a good many years since I took this thing apart, and this is my first time doing anything more involved than changing a water pump.

Thanks in advance.

Sam

 

[Chest Rockwell]

Re: ID These Ports Please

View attachment 2443

Coolant from heater core on the left, Temp switch in the middle, coolant for turbo on right.

 

[1madgumby]

Re: ID These Ports Please

from left to right. heater hose, cooling temp gauge sensor, turbo cooling feed line. sad I know them off the back of my hand. lol..

 

[DynaGlide]

Re: ID These Ports Please

Excellent! Thank you fellas much.

Hopefully I can get everything else figured out in a timely fashion. I just finished my external trans filter today, and am thinking of adding a trans cooler to it as well since I eliminated my cooler lines to the radiator. I do have a derale pan, but worry it won't be enough. We'll see if I can resist adding stuff.

Thanks again!

 

[DynaGlide]

Re: ID These Ports Please

Where does the stock turbo oil supply come from? I have a huge long braided hose that I assume was the supply line.

 

[1madgumby]

Re: ID These Ports Please

drivers side half way down the block., line runs behind the motor to the turbo.

 

[Loeryder]

Re: ID These Ports Please

drivers side of the block just above the oil filter adapter.

 

[DynaGlide]

Re: ID These Ports Please

Seriously, I don't know how I stayed away from this site for so long. You guys are the heat.

We'll be starting this dumb ass truck up soon. There will be updates.

 

[93 TY 2185]

Re: ID These Ports Please

Good to see you are still working on it.:tup:
Give me a call when you get it up and running or before if you want some help.

 

[1madgumby]

Re: ID These Ports Please

Get it running for Nats !!

 

[DynaGlide]

Re: ID These Ports Please

Okay...

There are two oil ports directly above the filter adapter on the block. There is one that is slightly higher and to the right of the port that I'm assuming is the correct port for turbo oil feed. Is this even an oil port? Do I need to plumb this to something, or plug it?

Sorry for so many questions, it's just been so long since I took this damned thing apart.

Thanks again.

Sam

 

[jwaller]

Re: ID These Ports Please

Okay...

There are two oil ports directly above the filter adapter on the block. There is one that is slightly higher and to the right of the port that I'm assuming is the correct port for turbo oil feed. Is this even an oil port? Do I need to plumb this to something, or plug it?

Sorry for so many questions, it's just been so long since I took this damned thing apart.

Thanks again.

Sam

use the bottom one. the top one is a dummy that does nothing.

 

[DynaGlide]

Re: ID These Ports Please

Awesome. I thank you.