I still have parts "For Sale" I will be attending E-Town Swap Meet 9-27

[ViciousV6]

Hey guys,

I still have parts available if anyone is interested in any of my parts, i can bring these along with me.

(1) Perfect Passanger Syclone or Typhoon Door with cladding. Needs a mirror and door panel. Complete. $ 300.00 Cash or Paypal + 3.25%

(2) Waller Solid Steering Shaft with stainless Steel joints $ 200.00 Cash or Paypal + 3.25%

(3) Remote Oil Filter mounts and lines in excellent Condition $ 125.00 Cash or Pyapal + 3.25%

(4) APC Tailights clear or smoked (not sure which ones) $ 100.00 Cash or Paypal + 3.25%

(5) Sony CDX-GT400 Head Unit CD Player with dash mount bracket, wire harness, remote control. $ 75.00 Cash or Paypal + 3.25%

(6) Gauge Mount for the radio delete (3) 2 1/16 gauges in place of the radio, complete bezel with vents ( doesn't have rear hatch release button hole. $ 200.00 Cash or Paypal + 3.25%

(7) Large Front Mount Intercooler with all piping and hoses $ 1500.00 Cash or Paypal + 3.25% ( price only because no shipping involved)

(8) Stock set of valve covers (black) $ 10.00 Cash or Paypal + 3.25%

(9) JL 3 8W6 Enclosure (competition) was in my ss454 Pick-Up $ 250.00 Cash or Paypal +3.25%

(10) Original Glove Box with Typhoon Badge $ 50.00 Cash or Paypal +3.25%

(11) Gauges Available Oil Press, Oil Temp, Coolant temp, ( these 3 are electric with senders, do have a Mechanical Oil Press too.

Mech oil pres. $30.00, Fuel Press Full Sweep $150.00 , Water Temp Elect. $ 30.00, 2 5/8 Oil Temp Elect. $45.00
(12) Factory Senders Knock Sensor, oil Press sender,

(13) Big Stuff 3 Unit with complete Stand Alone Harness, Wide Band o2, Data Log Cable and Trans Harness $ 2500.00 Cash or Paypal + 3.25%
*****$$$ 2300.00 Day of Show Special ******CASH

(14) Complete LS2 LQ9 Motor (from escalade) only 200 miles ( only missing a/c compressor, alternator & pcm) everything else complete $ 3500.00 Cash or Paypal + 3.25%

These are most of the parts hanging out in the garage still. Smaller parts i will bring a few totes with me, but any bigger parts will need to be payed prior to the show and i can bring them with me.
Anyone wishing to pay by paypal must pay me before Sept 26th in order for me to bring and with me for you to take home. Cash will only be accepted day of show.

Thanks Ralph
ViciousV6
email : Boostinblazer92@aol.com

 

[bezerk]

Re: I still have parts "For Sale" I will be attending E-Town Swap Meet 9-27

pics of radio?. and does it fit in the stock location.

 

[ViciousV6]

Re: I still have parts "For Sale" I will be attending E-Town Swap Meet 9-27

pics of radio?. and does it fit in the stock location.[/QU

 

[DRUNK411]

Re: I still have parts "For Sale" I will be attending E-Town Swap Meet 9-27

Pics of the tail lights and would you want to split them up I might be interested in the smoked. But please send pics of all I will see if I can find someone to go in on the others with me. Thanks

 

[ViciousV6]

Re: I still have parts "For Sale" I will be attending E-Town Swap Meet 9-27

Pics of the tail lights and would you want to split them up I might be interested in the smoked. But please send pics of all I will see if I can find someone to go in on the others with me. Thanks

(4) APC Tailights clear or smoked (not sure which ones) $ 100.00 Cash or Paypal + 3.25%

What i means is i'm not sure which kind they are. Not that i have 2 pairs, otherwise i would of posted 1 pair of each. Gotta dig them out of boxes.

I will take some pics of these 2morrow.

Ralph

 

[ViciousV6]

Re: I still have parts "For Sale" I will be attending E-Town Swap Meet 9-27

Just so everyone is clear these prices are for Pick-up only @ the Swap Meet on 9-27 if you want anything shipped it will be priced add'l with shipping.


P.S. Jeff i will bring that sway bar to the swap meet for you or Don to pick up.


Ralph

 

[NJ93TY]

Re: I still have parts "For Sale" I will be attending E-Town Swap Meet 9-27

Interested in the CLEAR lights, if you got them, pics pending

 

[Baythan]

Re: I still have parts "For Sale" I will be attending E-Town Swap Meet 9-27

Ralph....I still have your stock Ty radio!!!! Are you coming to Hooters or should I just ship it back to you? If you're selling it, I will ship it to a buyer if you'd prefer.

 

[ViciousV6]

Re: I still have parts "For Sale" I will be attending E-Town Swap Meet 9-27

Ralph....I still have your stock Ty radio!!!! Are you coming to Hooters or should I just ship it back to you? If you're selling it, I will ship it to a buyer if you'd prefer.

I will be At Hooters as long as we do it on a Sunday otherwise Sat. i will be working. I will be @ E-Town if anyone near you is coming this way to the show.

Thanks
Ralph

 

[alwayswantedone]

Re: I still have parts "For Sale" I will be attending E-Town Swap Meet 9-27

P.S. Jeff i will bring that sway bar to the swap meet for you or Don to pick up.


Ralph

Thank you sir. If I can't make it I will let Don know.

Just a thought here but if you sell the intercooler local and the buyer wants to swap core supports and inner fender well for the already made to fit ones let me know. Or if you want to trade something for them to sell it all as a package let me know.

 

[Raist103]

Re: I still have parts "For Sale" I will be attending E-Town Swap Meet 9-27

does the head unit have a ipod hook up?

cold air price?

 

[warmpancakes]

Re: I still have parts "For Sale" I will be attending E-Town Swap Meet 9-27

ok on the door you list it as a passenger side door and the first 2 are of a rh door the third is a LH door? do you have a LH door for sale?

 

[vanillagorilla]

Re: I still have parts "For Sale" I will be attending E-Town Swap Meet 9-27

Is the engine an LS2 or an LQ9? LS2=aluminum block; LQ9=iron block

 

[ViciousV6]

Re: I still have parts "For Sale" I will be attending E-Town Swap Meet 9-27

Is the engine an LS2 or an LQ9? LS2=aluminum block; LQ9=iron block

LS2 Can be either Aluminum block or Iron Block depending on car or truck!!!

Most HD Trucks and Suburbans and Caddy's have a LS2 LQ9 Iron block Motor.

LQ9 means Iron Block.

 

[ViciousV6]

Re: I still have parts "For Sale" I will be attending E-Town Swap Meet 9-27

ok on the door you list it as a passenger side door and the first 2 are of a rh door the third is a LH door? do you have a LH door for sale?

Some how the photo must of reserved itself. I only have a mint Passenger Door.

Ralph

 

[ViciousV6]

Re: I still have parts "For Sale" I will be attending E-Town Swap Meet 9-27

does the head unit have a ipod hook up?

cold air price?

Has Mp3 hookup but not sure about ipod.

Cold Air say $ 50.00 with filter.

Ralph

 

[ViciousV6]

Re: I still have parts "For Sale" I will be attending E-Town Swap Meet 9-27

Added. More Pictures of most parts.

Still got some other stuff, Datamaster DIY kit, Rear Wings for Typhoon, Brand new Hinges for winged Typhoons, Awesome pair 300 miles Rotors Duralast for factory brakes, Oil pumps M55A Mellings, Brand New replacment Heater Core only in truck for 1month before removing A/C $25.00, and sure more to come.

Ralph

 

[NJ93TY]

Re: I still have parts "For Sale" I will be attending E-Town Swap Meet 9-27

Pass on the lights, I thought they were totally clear, I have those same lights. Thanks anyway.

 

[vanillagorilla]

Re: I still have parts "For Sale" I will be attending E-Town Swap Meet 9-27

LS2 Can be either Aluminum block or Iron Block depending on car or truck!!!

Most HD Trucks and Suburbans and Caddy's have a LS2 LQ9 Iron block Motor.

LQ9 means Iron Block.

True, and LQ9 is an iron block but...

Most HD trucks have an LQ4 which is a low comp. iron 6.0L with either iron heads (99-00) or aluminum
SS Silverados, VHO's, Esky's got the LQ9, which is a high compression iron 6.0L with 317aluminum heads
The only "trucks" an LS2 came in is the TBSS and the SSR, which had an aluminum block only.

LS2's are Gen IV V8's and the LQ9 is a Gen III. The easiest way to tell is if the knock sensors are under the intake. If they are, then its a Gen III V8. Gen III and IV's have quite a few other differences, but most importantly the PCM's operate totally differently.

I'm not trying to be a jerk, but I ask because if you have an aluminum engine out of an Esky, then you have an L92 6.2L which is worth way more than you're asking in complete form.:tup:

http://en.wikipedia.org/wiki/GM_Vortec_engine#

This has been a common misconception lately. You can't have an engine with two different block materials with the same RPO. Different block materials means a different configuration (LM7 vs. LM4 vs L33 for example). , which means a different part number, which means a different RPO.

 

[DRUNK411]

Re: I still have parts "For Sale" I will be attending E-Town Swap Meet 9-27

Gonna pass on the lights also if they were the smoked I probably would have taken them. Thanks