allwheeldriven
New member
Re: HotRodV6 is a thief
He is still updating his scam..I mean GP post on http://www.s-seriesforum.com
He is still updating his scam..I mean GP post on http://www.s-seriesforum.com
HotRodV6 is a thief
- Thread starter Daryl H
- Start date
Daryl H
Donating Member
Re: HotRodV6 is a thief
That would be awesome.
I sent a Paypal request for $235 to HotRodV6.
Like I am going to get hit with Paypal fees 'cause he can't provide a product in 6 months.
Not sure why I have to wait for cables to come for him to make brackets.
SEND MONEY OR BRACKETS. DO NOT WAIT ON CABLES!!!
I will take $220 from Paypal or $215 by check.
MRKING said:
That would be awesome.
I sent a Paypal request for $235 to HotRodV6.
HotRodV6 said:
Like I am going to get hit with Paypal fees 'cause he can't provide a product in 6 months.
Not sure why I have to wait for cables to come for him to make brackets.
SEND MONEY OR BRACKETS. DO NOT WAIT ON CABLES!!!
I will take $220 from Paypal or $215 by check.
Re: HotRodV6 is a thief
i never said i was going to take sides. he is really not that local to me, over an hour drive in light traffic. and like some of the others have said, he has been helpful in the past. this does not change that he is in a bad spot ie in over his head as it sounds. he should be more available and reply to the people who sent him money for sure. pictures of the items he has already, contracts with vendors for parts for the items in the kit, pictures of one kit laid out as it will be shipped and one installed on a truck. on a brighter note, i went to erik with a k's party last night and had a great time, really nice guy. a few other board members were there too. erik has a REALLY nice pair of trucks. well, as far as the gp discussed here. i think mike should be aware of the lynching that is developing and do what needs to be done to make it right.
i never said i was going to take sides. he is really not that local to me, over an hour drive in light traffic. and like some of the others have said, he has been helpful in the past. this does not change that he is in a bad spot ie in over his head as it sounds. he should be more available and reply to the people who sent him money for sure. pictures of the items he has already, contracts with vendors for parts for the items in the kit, pictures of one kit laid out as it will be shipped and one installed on a truck. on a brighter note, i went to erik with a k's party last night and had a great time, really nice guy. a few other board members were there too. erik has a REALLY nice pair of trucks. well, as far as the gp discussed here. i think mike should be aware of the lynching that is developing and do what needs to be done to make it right.
George Blake
DONATING MEMBER
Re: HotRodV6 is a thief
He's not in over his head. I just contacted the company he was "supposedly " using for the cables......They have NO information on HRV6. I gave them all of the contact info in the doghouse section and there is NOTHING on file there for him. ie, he's NEVER ordered ANYTHING. You guys handle it however you want but this is fraud. Until he can give a contact where he is actually having cables done and a contact where he is having waterjetting done, he's just stealing money.
I've done all I can do to help. You guys need to file fraud charges/complaints.
He was logged on here last night and didn't post anything.
He's not in over his head. I just contacted the company he was "supposedly " using for the cables......They have NO information on HRV6. I gave them all of the contact info in the doghouse section and there is NOTHING on file there for him. ie, he's NEVER ordered ANYTHING. You guys handle it however you want but this is fraud. Until he can give a contact where he is actually having cables done and a contact where he is having waterjetting done, he's just stealing money.
I've done all I can do to help. You guys need to file fraud charges/complaints.
He was logged on here last night and didn't post anything.
91blazins10
Active member
Re: HotRodV6 is a thief
Looks like hes trying to sell this
http://www.blazinlow.com/forum/showthread.php?t=72014
Looks like hes trying to sell this
http://www.blazinlow.com/forum/showthread.php?t=72014
Re: HotRodV6 is a thief
well for one, im not haveing anybody waterjet the brackets for me, im making them myself, the cables will be done and shipped on wenesday and i should have them by early next week at the lastest and will get everything boxed up and shipped out asap after that.
well for one, im not haveing anybody waterjet the brackets for me, im making them myself, the cables will be done and shipped on wenesday and i should have them by early next week at the lastest and will get everything boxed up and shipped out asap after that.
Daryl H
Donating Member
Re: HotRodV6 is a thief
If everyone on the internet could find out some more info on him:
Parents address and home phone.
Where he works (if he has a job)
What doughnuts he likes to eat.
Maybe his dad would like to know what is going on and can help at 2 in the morning.
This is what has been posted so far:
Michael Steven Tibedeau
9351 Youngstown Pl.
HumbleTX 77396
Home Phone:
281-441-1258
Cell Phone
281-687-4168
Born
February 21, 1975
Post this on as many bulletins boards as possible.
Please add all info to the thread: Need some help/information
If everyone on the internet could find out some more info on him:
Parents address and home phone.
Where he works (if he has a job)
What doughnuts he likes to eat.
Maybe his dad would like to know what is going on and can help at 2 in the morning.
This is what has been posted so far:
Michael Steven Tibedeau
9351 Youngstown Pl.
HumbleTX 77396
Home Phone:
281-441-1258
Cell Phone
281-687-4168
Born
February 21, 1975
Post this on as many bulletins boards as possible.
Please add all info to the thread: Need some help/information
Daryl H
Donating Member
Need some help/information
Need some help/information
As many of you already know that HotRodV6 has still yet to provide any products for the $2,000 worth of money he has stolen from fellow members.
If everyone on the internet could find out some more info on him and
post this on as many bulletins boards as possible.
Parents address and home phone.
Where he works (if he has a job)
What doughnuts he likes to eat.
Maybe his dad would like to know what is going on and can help at 2 in the morning.
This is what has been posted so far:
Michael Steven Tibedeau
9351 Youngstown Pl.
HumbleTX 77396
Home Phone:
281-441-1258
Cell Phone
281-687-4168
Born
February 21, 1975
Thanks in advance.
Need some help/information
As many of you already know that HotRodV6 has still yet to provide any products for the $2,000 worth of money he has stolen from fellow members.
If everyone on the internet could find out some more info on him and
post this on as many bulletins boards as possible.
Parents address and home phone.
Where he works (if he has a job)
What doughnuts he likes to eat.
Maybe his dad would like to know what is going on and can help at 2 in the morning.
This is what has been posted so far:
Michael Steven Tibedeau
9351 Youngstown Pl.
HumbleTX 77396
Home Phone:
281-441-1258
Cell Phone
281-687-4168
Born
February 21, 1975
Thanks in advance.
Loeryder
New member
Re: HotRodV6 is a thief
Here is his resume on funeral jobs.com
http://funeraljobs.com/plugins/jobs/resumes/resume[114].doc
While he might be looking for a funeral job his resume says his current employer is:
Frontier Pawn & Gun
Humble TX
Google is your friend!
Frontier Pawn & Gun
1301 1st St E
Humble, TX 77338
(281) 446-6007
Call and ask his boss if they know anything about all the money he has taken from everyone here. Maybe they are missing some money around the pawn shop too.
those places are usually run pretty loosely.
They can buy and sell lots of stuff off the record fairly easily.
He was also on the J Body forums.
What the F is a J Body anyways?
http://www.j-body.org/members/hotrodv6/
www.Whitepages.com
Turns up only 2 families with that last name in the entire state of TX.
One is Michael the other appears to be his parents but I am not for sure.
http://www.whitepages.com/search/Fi...=&name=Tibedeau&street=&city_zip=&state_id=tx
Feel free to call them and ask if they know him.
Tibedeau, Craig A & Jacqueline J
Ages:50-54, 50-54
2801 Church Dr
Corinth, TX 76210-3522
(940) 498-0821
Here is his resume on funeral jobs.com
http://funeraljobs.com/plugins/jobs/resumes/resume[114].doc
While he might be looking for a funeral job his resume says his current employer is:
Frontier Pawn & Gun
Humble TX
Google is your friend!
Frontier Pawn & Gun
1301 1st St E
Humble, TX 77338
(281) 446-6007
Call and ask his boss if they know anything about all the money he has taken from everyone here. Maybe they are missing some money around the pawn shop too.
those places are usually run pretty loosely.
They can buy and sell lots of stuff off the record fairly easily.
He was also on the J Body forums.
What the F is a J Body anyways?
http://www.j-body.org/members/hotrodv6/
www.Whitepages.com
Turns up only 2 families with that last name in the entire state of TX.
One is Michael the other appears to be his parents but I am not for sure.
http://www.whitepages.com/search/Fi...=&name=Tibedeau&street=&city_zip=&state_id=tx
Feel free to call them and ask if they know him.
Tibedeau, Craig A & Jacqueline J
Ages:50-54, 50-54
2801 Church Dr
Corinth, TX 76210-3522
(940) 498-0821
warmpancakes
New member
Re: HotRodV6 is a thief
j BODY IS CAVALIER SUNFIRE
j BODY IS CAVALIER SUNFIRE
4C FED
Absolutum Dominium
Re: Need some help/information
Re: Need some help/information
Start signing him up for stuff.
Scientology, OUT magazine, http://www.gaytexas.org/directory.htm ....
Re: Need some help/information
Start signing him up for stuff.
Scientology, OUT magazine, http://www.gaytexas.org/directory.htm ....
Black Knight
I Glow Therefore I am
Re: Need some help/information
Re: Need some help/information
:haha:
Re: Need some help/information
4C FED said:
:haha:
JustBeachin
Plays well with others
Re: Need some help/information
Re: Need some help/information
http://www.hrcactioncenter.org/campaign/coming_out_day_kit_standard
Re: Need some help/information
http://www.hrcactioncenter.org/campaign/coming_out_day_kit_standard
Re: Need some help/information
Re: Need some help/information
i fully understand this is a serious issue, especially to those involved. But lets not make 50 threads about it. Please just keep 1 thread going for this topic while its hopefully being resolved. There is no need to cloud up the forums w/ tons of threads about hrv6.
Re: Need some help/information
i fully understand this is a serious issue, especially to those involved. But lets not make 50 threads about it. Please just keep 1 thread going for this topic while its hopefully being resolved. There is no need to cloud up the forums w/ tons of threads about hrv6.
allwheeldriven
New member
Re: Need some help/information
Re: Need some help/information
Re: Need some help/information
But this one made me laugh!! :rotf:MikeRenz said:
alwayscode390
pppssssshhhhhtttttttttttt
Re: Need some help/information
Re: Need some help/information
Who has the avatars....or do I need to make my own?! ---
Re: Need some help/information
Who has the avatars....or do I need to make my own?! ---
Loeryder
New member
Re: Need some help/information
Re: Need some help/information
Just right click save as someone else's avatar and then upload to your profile.
And I have added more of his personal contact info to the other 2 threads that are going on.
I agree this one should just get merged in with the others.
constant replies will keep it pushed to the top.
Re: Need some help/information
Just right click save as someone else's avatar and then upload to your profile.
And I have added more of his personal contact info to the other 2 threads that are going on.
I agree this one should just get merged in with the others.
constant replies will keep it pushed to the top.