headlight problems

Raist103

Engine Killer, iPhone Killer, Lawnmower Killer
when i first turn the ty on and then the headlights, the both come on but dim after i start driving one goes out and the other gets brighter. any ideas? i had the new lights from ebay, that you only replace the bulb. like 75-90bucks i think. they were fine for about 6months. just noticed it the other day.
 

Captain Morgan

Moderated User
if you can wait till the 15th, we can have a Hooters parking lot wrench session. :D

I agree, it could be a bad ground, but its weird that it does that flip-flop of power deal.

how many Watts are the bulbs?
 

syclonekid43

New member
check the plug that goes to the back of the headlight. commona problem running diffrent lights in the front = melted headlight plug. :drinking: :drinking: :drinking: :drinking: :drinking: :drinking:
 

bdubb

I am teh kingpin!
bingo on the melted plug.



been there done that, now i switched over to brighter headlights, new wires, and never had a problem.

not those shitty ricer bulbs
 

GM TURBO

Sell Out
bdubb said:
bingo on the melted plug.



been there done that, now i switched over to brighter headlights, new wires, and never had a problem.

not those shitty ricer bulbs

Liar.................I remember a certain Syclone that could only turn one light on at a time.
 

Raist103

Engine Killer, iPhone Killer, Lawnmower Killer
thanks guys if it is not fixed by then i will let everyone look. if it is the plug, would anyone have the part #, or a place i can get it? does it just plug in or is there splicing?
 

Captain Morgan

Moderated User
Raist103 said:
thanks guys if it is not fixed by then i will let everyone look. if it is the plug, would anyone have the part #, or a place i can get it? does it just plug in or is there splicing?

what Wattage are the new bulbs??
 

syclonekid43

New member
i found my plugs at the local parts store. if you go to the dealer they should know off hand what part number it is. just about every car and truck has the same plug untill the changed over from the sealed beam headlight set up.the ones im running in my truck are 55 watt low 65 high. which is what a sealed beam is. i just think because of the h4 (9003) just runs a little hotter. i wont go with a higher watt bulb .for the fact you will probally have to rewire the whole headlight harness. :drinking: :drinking: :drinking:
 
Top