FS: TPI Intake (SBC)

sytyguy

sytyguy

Moderated User
Anyone have use for an old TPI intake? I was cleaning up our backroom at work and found this complete set and another set of runners and another lower intake (14081005). I snapped some pics of the complete intake set, but can take more pics or take pics of the other parts if needed.

Some things of note:

- Both lower intakes are 14081005 ('85-'96 TPI) but use the same 6 bolt pattern as most SBC.
- All parts have been bead blasted and Hi-Temp clear coated.
- No injectors or rails.
- The other lower intake (not-pictured) has no sensors included.
- The other set of runners has a small dent in one runner.
- The lower intake in the set (pictured) has slotted middle bolt holes.
- The lower intake in the set (pictured) has no valley cover, the other intake does.
- The intake set includes the TB and several sensors.

Here's some pics:

TPI1.jpg


TPI2.jpg


TPI3.jpg


TPI4.jpg


I have no asking price, but have seen what they go for on ebay. I'm also not disillusioned into thinking that I'm gonna get top dollar for 'em, nor do I want to hang onto them any longer......so make an offer.

Like I said earlier, I'll get some pics up of the other parts ASAP.
 
G

GM TURBO

Sell Out
Re: FS: TPI Intake (SBC)

I always thought this was one of the coolest looking factory intakes. I have no use for it - GLWS!
 
1madgumby

1madgumby

New member
Re: FS: TPI Intake (SBC)

There not worth much. my cousin sat on his for 3 years & got $100 for it & he had the wiring harness & injectors in it.
 
sytyguy

sytyguy

Moderated User
Re: FS: TPI Intake (SBC)

1madgumby said:
There not worth much. my cousin sat on his for 3 years & got $100 for it & he had the wiring harness & injectors in it.
Click to expand...
Like I said in my first post.....I know what they go for on ebay (hence I know they don't bring much). I'm not out for high dollar or even respectable dollar.....just want to unload it to someone who might want it for a good price. Hence the reason I said make an offer. Ya dig? :tup:
 
1madgumby

1madgumby

New member
Re: FS: TPI Intake (SBC)

I dig.

sytyguy said:
Like I said in my first post.....I know what they go for on ebay (hence I know they don't bring much). I'm not out for high dollar or even respectable dollar.....just want to unload it to someone who might want it for a good price. Hence the reason I said make an offer. Ya dig? :tup:
Click to expand...
 
sytyguy

sytyguy

Moderated User
Re: FS: TPI Intake (SBC)

Nothing rude about it. You make an offer.....worst thing I do is say, "No."

Lemme check S&H (reply with zip) and I'll PM you.
 
SY2455

SY2455

70's Veteran
Re: FS: TPI Intake (SBC)

Has anyone tried cutting and welding 1 of these up to fit the 4.3 ? It would make a nice front inlet manifold.
 
You must log in or register to reply here.
Top