FS: syclone cladding, bumper cover and support

[DanenGraham]

I have a bumper cover that has a large crack in it, but should be an easy fix.

A bumper support that has been bent a little, but could still be used. I do need the frame mounts off of it, so i may cut them off, could just make some new ones too.

Both rear bed corners, one is primed and ready for paint but missing a small section on the very bottom/inside. Hard to even tell when on the truck.

The other has some major damage and might be fixable or could be used to fix another one.

Both rear wheel arches, all tabs are broken off, but have most or all of them to put back on.

Bed side, behind driver door.

 

[blacktyaffair]

Re: FS: syclone cladding, bumper cover and support

Dibs.

 

[ziembic]

Re: FS: syclone cladding, bumper cover and support

2nds

 

[DanenGraham]

Re: FS: syclone cladding, bumper cover and support

I will get some pics posted in the morning, so you know what would need to be fixed.

 

[T-Bone]

Re: FS: syclone cladding, bumper cover and support

I am getting too old and slow.....3rd dibs.

 

[DanenGraham]

T, most of this is from you. I bought it earlier this year. The bumper cover I picked up off someone else here, and the support is from my truck.

 

[DanenGraham]

Re: FS: syclone cladding, bumper cover and support

Here you go, some had more damage than i thought. But i still think its fixable. Bumper cover is cracked and has license plate holes drilled. Only other damage is one rivet mounting tab is split but not bad. Does has scratches/blemishes but not bad.

Bumper support, bent in on one side a little, looks like it has been straitened at some point. It is missing the two bottom studs for the bracket/mounts. And one of the studs for the fog light screws.

This is the bent side, its hard to tell/not that bad.

Overall shape

The Pas side corner, arch, bedside all came off the same truck, so any broken parts are all here, or still screwed to the other pieces of cladding

This is the Driver side off my truck, it has been primed and sanded two or three times. The tab on the back has broken off again from being moved around stored for 3 years. But i do have it. You can see the missing section in the first picture. Could be fixed, but hard to see when on the truck.

 

[DanenGraham]

Re: FS: syclone cladding, bumper cover and support

I also have the replacement panels for the bed. Both corners, and both front sides infront of the wheel wells. Just the bottoms not the entire sides.

 

[DanenGraham]

Ziembic you have have a PM please let me know if you are still interested.

 

[ziembic]

Re: FS: syclone cladding, bumper cover and support

PM replied.

 

[DanenGraham]

Re: FS: syclone cladding, bumper cover and support

Update on first post. I am now splitting this up.

Bumper cover is still for sale, $150 + shipping.

 

[DanenGraham]

Re: FS: syclone cladding, bumper cover and support

And just a heads up. Sportmachines posted some decent prices on NOS cladding on facebook. Copied and pasted.



NOS Cladding - Syclone rear corners - $250 each
NOS Syclone rear arches and bed cladding - $125
NOS Syclone Door cladding with sticker, in the plastic - $150 each
NOS Syclone & Typhoon fender arches - $375 each

 

[DanenGraham]

Re: FS: syclone cladding, bumper cover and support

Update, again. The bumper support is sold and pending payment.

Everything else is still for sale. Prices are OBO, without shipping or paypal fees.

Bumper cover $150
both bed corners, Driver side $100, Pas side $50
both arches $75 for both, $50 each
Pas. bed side $100

 

[DanenGraham]

Re: FS: syclone cladding, bumper cover and support

This stuff is just in my way now. Make me an offer on any parts you want!

Cover-- $100
Both corners, $100
Both arches $50
Bed side $50

$250 + shipping and fees for everything

 

[Sportmachines]

Re: FS: syclone cladding, bumper cover and support

PM sent