FS: Baer Brakes setup $1150obo

MikeRenz

not stock
Front Kit Only! 2 piece rotors. Only have 2500mi on them at most.

These are coming off the ls1 truck...i want to use my own c5 kit instead.

Pretty sure this is a $1500 front setup....i do not have receipts for them though. Feel free to correct me if i'm mistaken/wrong.

$1150obo will take the complete setup. Lines, brackets, calipers, rotors, pads, and spindles.....everything to make this a complete bolt on affair.

IMG_0016.jpg


IMG_4008.jpg
 
Last edited:

MikeRenz

not stock
Re: FS: Baer Brakes setup $1800obo

Re: FS: Baer Brakes setup $1800obo

maybe zinc coated, not ceramic. Unsure...but maybe someone else can chime in. These were on the truck when i bought it, and i'm looking to go a different route.

maybe $1700 shipped sounds more appetizing.
 

dgoodhue

BuSTeD 4.3
Re: FS: Baer Brakes setup $1800obo

Re: FS: Baer Brakes setup $1800obo

Do you have any close up of the brakes. Also what size are the rotors.
 

MikeRenz

not stock
Re: FS: Baer Brakes setup $1800obo

Re: FS: Baer Brakes setup $1800obo

Do you have any close up of the brakes. Also what size are the rotors.

i can take closeups this weekend. I think they are 13 front and 12 rear...but i will verify tomorrow evening.
 

bdydrpds10

Yes I drive a Typhoon.
Re: FS: Baer Brakes setup $1800obo

Re: FS: Baer Brakes setup $1800obo

I think you are close on the price, I have the track kit 13" front and 12" rear. I know my front kit was a little less than those but you have the 2 piece rotors correct?

I know the 2 piece rotors are lighter and cost more.

They sure look good. :tup: I love looking at mine and hope to install them soon.:D
 

bdydrpds10

Yes I drive a Typhoon.
Re: FS: Baer Brakes setup $1800obo

Re: FS: Baer Brakes setup $1800obo

maybe zinc coated, not ceramic. Unsure...but maybe someone else can chime in. These were on the truck when i bought it, and i'm looking to go a different route.

maybe $1700 shipped sounds more appetizing.

I know mine are zinc coated, but again mine are the 1 piece rotors so they may be different.
 

crazykaese

91ProtoTy/IndyPaceTribute & Sawzall Master
Re: FS: Baer Brakes setup $1800obo

Re: FS: Baer Brakes setup $1800obo

I have this same exact setup on my Typhoon - I love it.

Still have to hookup the e-brake stuff.

Baer Tracker kit - fits nice/installs easy.

Bump for a great mod for our trucks!!
 

MikeRenz

not stock
Re: FS: Baer Brakes setup $1800obo

Re: FS: Baer Brakes setup $1800obo

i might include the spindles also....to further sweeten the deal. :tup:
 

dutchty

Member
Re: FS: Baer Brakes setup $1800obo

Re: FS: Baer Brakes setup $1800obo

I know mine 2 Piece 13" (Eradispeed) baer and 1 piece rear 12" discs were zinc coated.
 

MikeRenz

not stock
Re: FS: Baer Brakes setup $1800obo

Re: FS: Baer Brakes setup $1800obo

sale tentatively pending....

will add some more/new pics tonight of brakes.
 

MikeRenz

not stock
Re: FS: Baer Brakes setup $1800obo

Re: FS: Baer Brakes setup $1800obo

ok took some more pics last night....

This was the first time i opened the boxes for the rear brakes. Apparently they are just C5 rear brakes!?!? Can anyone confirm this? I had one person tell me that their baer brake kit that they got also just came w/ C5 rears. I was a bit surprised by this, as i wasn't expecting used parts cut off a corvette :roll:

IMG_0797.jpg


IMG_0798.jpg



obviously i will revisit the price of the kit now.


IMG_0800.jpg
 

dutchty

Member
Re: FS: Baer Brakes setup $1800obo

Re: FS: Baer Brakes setup $1800obo

ok took some more pics last night....

This was the first time i opened the boxes for the rear brakes. Apparently they are just C5 rear brakes!?!? Can anyone confirm this? I had one person tell me that their baer brake kit that they got also just came w/ C5 rears. I was a bit surprised by this, as i wasn't expecting used parts cut off a corvette :roll:

USED parts for a new BAER brake kit:roll:
looks the same as C5
My rear BAER brakes setup were also C5's but altered by BAER and also delivered with drilled-vented discs.
typhoonenivanfotosbijopapeet021.jpg

typhooncorvetteremmenenachterremcon.jpg
 

crazykaese

91ProtoTy/IndyPaceTribute & Sawzall Master
Re: FS: Baer Brakes setup $1800obo

Re: FS: Baer Brakes setup $1800obo

My Baer rear 12" Tracker kit looks identical to DutchyTy's kit.

I don't know what you got there Reny - sure doesn't look like genuine Baer stuff.

Yours looks like just stock Vette stuff.
 

MikeRenz

not stock
Re: FS: Baer Brakes setup $1800obo

Re: FS: Baer Brakes setup $1800obo

i know, and said, that this is just stock C5 rear stuff. Just trying to validate that this is a full baer kit or not. I guess i'll just sell the fronts as baers and use the rears to make my rear c5/c6 kit. no biggie.
 

Sy-1177

Turbo Inside
Re: FS: Baer Brakes setup $1800obo

Re: FS: Baer Brakes setup $1800obo

I had a Baer front kit on the front of my Typhoon that took all the same hardware as a C5 vette. I believe its all the same just with the Baer name stamped on it
 

JaySS

New member
Re: FS: Baer Brakes setup $1800obo

Re: FS: Baer Brakes setup $1800obo

ok took some more pics last night....

This was the first time i opened the boxes for the rear brakes. Apparently they are just C5 rear brakes!?!? Can anyone confirm this? I had one person tell me that their baer brake kit that they got also just came w/ C5 rears. I was a bit surprised by this, as i wasn't expecting used parts cut off a corvette :roll:

IMG_0797.jpg


IMG_0798.jpg



obviously i will revisit the price of the kit now.


IMG_0800.jpg

Your probably not going to like this, but the rears look like LS1's cut directly off the car at the axle tubes.

http://coloradok5.com/forums/showthread.php?t=246855

As far as your front calipers - they are not Corvette (or Camaro). They do resemble the F-body calipers, as the fins are shortened on the F-cars to allow a 16" wheel.

I think you'll find they are PBR calipers, but made for a Mustang as shown here:

http://forums.corral.net/forums/showthread.php?p=9353792

The other set shown by dutchty are not C5 - C5's have a drum type parking brake - They look to be LT1 F-Body rear calipers.

http://www.ls1tech.com/forums/non-l...top-shades-borlatips-t-fillerpanels-more.html

- J
 
Last edited:

sy#2716

SyTy 4 Life
Re: FS: Baer Brakes setup $1800obo

Re: FS: Baer Brakes setup $1800obo

Those rear calipers look exaclty like what was on my 95 lt1 camaro. The ls stuff IIRC had a drum parking brake in the disk.
 

dutchty

Member
Re: FS: Baer Brakes setup $1800obo

Re: FS: Baer Brakes setup $1800obo

The other set shown by dutchty are not C5 - C5's have a drum type parking brake - They look to be LT1 F-Body rear calipers.

http://www.ls1tech.com/forums/non-l...top-shades-borlatips-t-fillerpanels-more.html

- J

I think youre right , sorry.
but just looked up in old installpapers of Baer where I read that I can use vette C5 brake pads for replacement??? are these the same as LT1
original they are PBR rear brakes and delivered in the BAER rear brake kit.
 

Syclone#892

Member
Re: FS: Baer Brakes setup $1800obo

Re: FS: Baer Brakes setup $1800obo

Hmm I am pretty sure those are ls1 rear brakes. Didn't the lt1's have the racheting caliper for the parking brake? Its pretty obvious that these have the internal drum parking brake because of the little arm coming out of the backing plate.
I would say for sure they are not vettes because vettes don't have axle tubes :D

Good luck with the sale Mike and sorry to hear about the parts!
 
Top