engine block pics

[blkty]

does anyone have any pics off ther engine block without flex plate bolted on a bolt flew out and ended up in my trans dust cover trying to see where it came from before i tear into it thanks blkty

 

[Quickstop [UK]]

Re: engine block pics

what size bolt? post a pic of it up - just put my engine in so might remember...

 

[blkty]

Re: engine block pics

its a 3/8-16 9/16 head and under the head it measures 5/8 long thanks blkty

 

[JSM]

Re: engine block pics

Almost sounds like ground strap bolt on back of head.

 

[warmpancakes]

Re: engine block pics

sounds like one of the ground bolts im resonably sure flywheel bolts are metric

 

[SY2455]

Re: engine block pics

If it ended up in your trans dust cover as your 1st post stated. You may have lost a TC bolt, I just cant remember the size. I think it may be a 15mm head which a 9/16 wrench would fit.

 

[blkty]

Re: engine block pics

the tc bolts to flywheel are all there

 

[blkty]

Re: engine block pics

i dont think its the flywheel to crank bolts because they are flanged bolts the ground strap bolts are still there i just dont know where it came from or how it would get in there

 

[Quickstop [UK]]

Re: engine block pics

post a pic dude - I can't remember sizes...

TC bolts are way shorter than that.

3/8-16 5/8 is a lower intake bolt bolt or possibly from your engine mounts.

distributor bolt is the same, as well as the brackets for holding the coil or the MAP sensor - taken the valve covers off recently? would you have taken any of those brackets off?

 

[Norm]

Re: engine block pics

Here's the only pic of there rear of my engine. There's no bolts behind the flex plate that I can remember.

 

[SY2455]

Re: engine block pics

I just went out to my spare engine that doesn't have the flex plate on it. There are no other bolts on the back side of the block that would end up behind your trans dust cover, but the TC bolts and the flex plate bolts. I would take a picture for you but I don't have the means too, the cable was lost for the camera. Could you have lost a transmisson pump bolt?

 

[Quickstop [UK]]

Re: engine block pics

was it in there from before?

 

[blkty]

Re: engine block pics

it must have just fallin in somehow maybe the hole in the dust cover for the starter but i dont seem to be missing any other bolts thanks for all your guys help blkty

 

[autoaddictions]

Re: engine block pics