DataMaster/Alky/data error

[SpoolingTurbo6]

Re: DataMaster/Alky/data error

Just to make it simple....... Put it on between the power wires on the power source - + coming from your fuse box

 

[Jer]

Re: DataMaster/Alky/data error

Just to make it simple....... Put it on between the power wires on the power source - + coming from your fuse box

Right. Do it at the coil though because it's easiest.

 

[SpoolingTurbo6]

Re: DataMaster/Alky/data error

Confusing? Hopefully not. Lets break it down some.

85 - relay coil can be either positive or negative but must obviously be opposite 86

86 - Relay coil can be either Negative or Positive.

87 - has power when the Relay coil (85 and 86)is energized. Polarity is based on what current you have on Terminal 30.

87A - Receives power from Terminal 30 When relay coil is not energized.

30 - +12volts if you want to trigger +12volts or Ground if Your Using the relay to ground something.

 

[Tommyquest]

Re: DataMaster/Alky/data error

Thanks, I spoke to Julio a couple of days ago. I hadn't looked at the setup in a while and for some reason I was thinking the twisted pair was going to the pump.