cool little calulator for turbo, injector and pump sizing

Quickstop [UK]

Quickstop [UK]

Combating adversyty.
Re: cool little calulator for turbo, injector and pump sizing

how do you find the VE of your engine then? this could be very handy for schooing a turbo for a project and stop mismatching.

Am a little worried my combo is only putting out 400hp!
 
13Pelle

13Pelle

Active member
Re: cool little calulator for turbo, injector and pump sizing

I have already spent way too much time playing with that. I like the numbers I am seeing on there.... estimates or not. Great for all the jack stand heroes out there. Cool find. Thanks for sharing. :D
 
Last edited:
TYTILIDIE

TYTILIDIE

METH HEAD
Re: cool little calulator for turbo, injector and pump sizing

I dont get how to use some of those spaces. How to figure htem. Otherwise, pretty sweet, I cant wiat to run my 10.9:rotf:
 
SikVSix

SikVSix

New member
Re: cool little calulator for turbo, injector and pump sizing

TYTILIDIE said:
I dont get how to use some of those spaces. How to figure htem. Otherwise, pretty sweet, I cant wiat to run my 10.9:rotf:
Click to expand...

I was thinking the same thing, but I found the list on the left side to be real helpful. He explains a lot of the stuff there.
 
3

383awdblazer

New member
Re: cool little calulator for turbo, injector and pump sizing

Compressor maps confuse the hell out of me. They are the same as pump curves for centrifugal water pumps which I have to occasionally deal with in my job. I wish I understood how to read that type of chart. :dunno:
 
autoaddictions

autoaddictions

Active member
Re: cool little calulator for turbo, injector and pump sizing

I just plugged my combination in ther and it was dead nutz on. Thats amazing!! Neet find.
 
WyoSyclone

WyoSyclone

Active member
Re: cool little calulator for turbo, injector and pump sizing

Flyin Ryan said:
Found this and it's pretty cool so I figured i'd share it and it would be concidered syty related somehow

http://www.hartlineperformance.com/airflow/airflow.html
Click to expand...

The drag and gear tables are cool too.... thanks for the link... hours of fun :D

play around with the intercooler efficiency and see how much horsepower can be picked up from an increase in intercooler efficiency.... I played around with the efficiency until the IATs matched what I show on my DM logs... tells me I should run 12.1's @ 111... hope that's true!
 
Last edited:
Try Me

Try Me

New member
Re: cool little calulator for turbo, injector and pump sizing

WyoSyclone said:
The drag and gear tables are cool too.... thanks for the link... hours of fun :D

play around with the intercooler efficiency and see how much horsepower can be picked up from an increase in intercooler efficiency.... I played around with the efficiency until the IATs matched what I show on my DM logs... tells me I should run 12.1's @ 111... hope that's true!
Click to expand...

I did the same thing with intercooler efficiency. Id love to be anywhere near what that thing says, it has me in the mid 9s at over 140mph @ 15lbs of boost :)
 
TYTILIDIE

TYTILIDIE

METH HEAD
Re: cool little calulator for turbo, injector and pump sizing

Wonder why it doesnt factor in your compression ratio?
 
Flyin Ryan

Flyin Ryan

hated cuz he drives fords
Re: cool little calulator for turbo, injector and pump sizing

haha glad everyone found these links to be as much fun as me and from what i've seen they are pretty damn close depending on how much info you provide
 
TYTILIDIE

TYTILIDIE

METH HEAD
Re: cool little calulator for turbo, injector and pump sizing

Never mind I figured it out. Stumbled on some cool formulas while doing it too. IM sure it stuff everyone already knows but me of course. This table is going to turn me in to a zombie by morning. I think I figured out why I couldnt get my truck past 13.2-4 last year.
 
You must log in or register to reply here.
Top