Chip
- Thread starter bouser
- Start date
REVEREND HARMON
Party in a box!
Re: Chip
Yes, you can use a them in each other
Yes, you can use a them in each other
Chest Rockwell
Active member
Re: Chip
You have a Hypertech chip? I've got one I was thinking about using, but haven't yet. What's the numbers on yours?
You have a Hypertech chip? I've got one I was thinking about using, but haven't yet. What's the numbers on yours?
Flyin Ryan
hated cuz he drives fords
Re: Chip
LOL that's funny but honestly it's not worth the money because you won't see much if any increase
LOL that's funny but honestly it's not worth the money because you won't see much if any increase
sytyguy
Moderated User
Re: Chip
If so desired, we can reprogram the Hypertech PROM for you.
http://www.hoodtuned.com/store/index.php?route=product/product&path=20_38&product_id=51
http://www.hoodtuned.com/store/index.php?route=product/product&path=20_38&product_id=52
If so desired, we can reprogram the Hypertech PROM for you.
http://www.hoodtuned.com/store/index.php?route=product/product&path=20_38&product_id=51
http://www.hoodtuned.com/store/index.php?route=product/product&path=20_38&product_id=52
JSM
Active member
Re: Chip
Hypertech....LOL
KB......LOL
ATR....LOL
The fact is All of these chips were done in the early days of syty world and at the time had very little information. They basically hacked a few things and changes (speed limit, EGR, maybe a fuel tweak, KB took off the knock retard feature, etc.) But the key word here is hacked.
With the tools available now, and the information we have collected, created to help anybody see that information even a novice tuner with 2 hrs of experience can exceed any of those chips.
You have almost convinced me to call hypertech and let them tell me the same thing, so I can return the persons comment with a "you obviously don't know your ass from a hole in the ground do you?"
Hypertech....LOL
KB......LOL
ATR....LOL
The fact is All of these chips were done in the early days of syty world and at the time had very little information. They basically hacked a few things and changes (speed limit, EGR, maybe a fuel tweak, KB took off the knock retard feature, etc.) But the key word here is hacked.
With the tools available now, and the information we have collected, created to help anybody see that information even a novice tuner with 2 hrs of experience can exceed any of those chips.
You have almost convinced me to call hypertech and let them tell me the same thing, so I can return the persons comment with a "you obviously don't know your ass from a hole in the ground do you?"
Flyin Ryan
hated cuz he drives fords
Re: Chip
ATR pitbull 2bar chip is the safest none OEM 2 bar chip out there.. but again not much increase is anything over stock chip.
It turns the IC pump on at a lower degree something like 60 degrees if I remember correctly.
It raises RPM fuel cutoff and timing while removing some limits like the first boost limit but it's still a 2bar chip which means it can't provide the needed fueling for anything over the stock boost limit which is 14.5psi.
ATR pitbull 2bar chip is the safest none OEM 2 bar chip out there.. but again not much increase is anything over stock chip.
It turns the IC pump on at a lower degree something like 60 degrees if I remember correctly.
It raises RPM fuel cutoff and timing while removing some limits like the first boost limit but it's still a 2bar chip which means it can't provide the needed fueling for anything over the stock boost limit which is 14.5psi.
SevenT6Vet
New member
Re: Chip
thread hijack!
So i finally got to my ECU and found a 1996 Hypertech PN 123 612
I immediately took it out and put the stock one in it's place. I haven't taken it out for a test drive yet, but I did start it up and it started and idled fine (it was late, time for bed).
I'm torn b/w the two reburn options. It's 100% stock minus the K&N filter and catback. Should I get the reburn of the hypertech to be for the 3 bar, but just say maximum boost of whatever the stock injectors can hold (minus 0.5-1 psi for factor of safety)? I do not want to mod this thing as I want the motor to last.
FWIW, I am having overboosting problems as well. Can't wait to go home tonight and see if going back to stock chip has fixed that or not.
thread hijack!
So i finally got to my ECU and found a 1996 Hypertech PN 123 612
I immediately took it out and put the stock one in it's place. I haven't taken it out for a test drive yet, but I did start it up and it started and idled fine (it was late, time for bed).
I'm torn b/w the two reburn options. It's 100% stock minus the K&N filter and catback. Should I get the reburn of the hypertech to be for the 3 bar, but just say maximum boost of whatever the stock injectors can hold (minus 0.5-1 psi for factor of safety)? I do not want to mod this thing as I want the motor to last.
FWIW, I am having overboosting problems as well. Can't wait to go home tonight and see if going back to stock chip has fixed that or not.
Gmtunedportguy
New member
Re: Chip
I have a hypertech I would sell if anyone is interested 122611 is the number on it, never installed $100 obo
I have a hypertech I would sell if anyone is interested 122611 is the number on it, never installed $100 obo
IpHoOnDyou
New member
Re: Chip
Honestly a 3 bar map, syty fuel reg, a walbro 255, and the Ultimate chip would work great for what you want to do! I have had mine in all summer and its great. You can change between 10 settings of timing and boost, has a lock out feature its really amazing and cannot say enough good things about it!! I am like you dont wana mod the shit out of my truck, but these are good mods and for the most part you cant see these mods.... Except the display for the ultimate and even that can be hidden!
Honestly a 3 bar map, syty fuel reg, a walbro 255, and the Ultimate chip would work great for what you want to do! I have had mine in all summer and its great. You can change between 10 settings of timing and boost, has a lock out feature its really amazing and cannot say enough good things about it!! I am like you dont wana mod the shit out of my truck, but these are good mods and for the most part you cant see these mods.... Except the display for the ultimate and even that can be hidden!
nello
Active member
Re: Chip
Anyone still using some of the Ultimate 58bins Tooky put up?
http://powertuneplus.com/syclone/58bins.shtm
Anyone still using some of the Ultimate 58bins Tooky put up?
http://powertuneplus.com/syclone/58bins.shtm