built short block

[randy merritt]

Well, the time has come, as the stock bottom end has given up the ghost. 0 psi on #1 cylinder is not very good. Exquisite blow by would be a good describer. Looking for a built short block (stout) if anyone has one. Combination of loose components would be considered. I know I can buy one assembled from any number of good vendors, but just looking.

 

[RenegadePete379]

Re: built short block

wtf? didnt you just throw a short block in your truck?

 

[randy merritt]

Re: built short block

no, only changed heads, cam, and injectors. I think this was a pre-existing condition that was amplified by the motor changes. Should have went with stout lower to begin with. Oh well, live and learn.

 

[RenegadePete379]

Re: built short block

it can be done but no one ever knows the life of there engine before they purchased it.

 

[Sportmachines]

Re: built short block

We have several options available. Give us a call and we can talk in more detail.

 

[denny]

Re: built short block

I have a 4 bolt .030 over block, je 30 over pistons and cyro crank, the crank need work.
Make me an offer..

some pic here
http://www.syty.net/forums/showthread.php?t=81184

 

[TurboTYPHOON]

Re: built short block

I have a 4 bolt .030 over block, je 30 over pistons and cyro crank, the crank need work.
Make me an offer..

some pic here
http://www.syty.net/forums/showthread.php?t=81184

If I wasn't on the other side of the country I would have bought this. Decent deal when you start adding in machine work and other stuff

 

[Don W.]

Re: built short block

Lots of choices out there from our good vendors. Just FYI I have a std. stock crankshaft for sale if you go the DIY route and need one.

 

[jpalmer]

Re: built short block

I have a brand new fully built short block. brand new gm crank, cryoed, splayed 4 bolt pro grams, 422 comp cam, .020 je's, eagle rods, even have a fluid dampener and a sfi approved flexplate, both new with it. The motor had to be torn down and re assembled because a valve kissed a piston, it is still being put back together at the machine shop and i can get photo verification of everything for you. it would be a brand new motor, after all, it only ran for 5 minutes after i first built it before the slight problem. Piston is being replaced with a brand new one. pm me if interested.

Rpm sells the same exact thing (minus short fill) for 7 grand.