Another shop project finished up..SLEEPER!!!!VIDEOS ADDED

[twin74s]

740rwhp 660rwtq on pump gas on 13 psi

818rwhp with 32% clutch slip... 818 x 32% slip=1079rwhp on 20psi and good gas!

engine is a LME 408 cu in
ported ls6 heads
custom cam motion camshaft
vic jr. intake
417 elbow
FAST 72mm tb
2-precision 64mm turbos
2-TiAl 38mm gates
TiAl 50mm BOV
417 intercooler
417 radiator
STOCK PCM with AEM driver box Tuned by RedDevil
3" electric cut outs
full 2.5" exhaust over axle with magnaflow mufflers
Moly 8 pt roll bar with removable door bars
mini tubbed to fit 26x11.50x15 et street
moser axles and c clip eliminators
Liberty Viper spec T56
innovative msbc-1 boost controller
AEM wideband


HUGE thanks to Supra James for the turbo parts from TiAL and Precision and RedDevil for the 3 bar speed density tune!!!

 

[Raist103]

Re: Another shop project finished up..SLEEPER!!!!

Re: Another shop project finished up..SLEEPER!!!!

very very sexy i would give all my cars for that

 

[SY2932]

Re: Another shop project finished up..SLEEPER!!!!

Re: Another shop project finished up..SLEEPER!!!!

BADASS !

 

[Jimmy]

Re: Another shop project finished up..SLEEPER!!!!

Re: Another shop project finished up..SLEEPER!!!!

Sweet.

 

[Don W.]

Re: Another shop project finished up..SLEEPER!!!!

Re: Another shop project finished up..SLEEPER!!!!

Nice job! :cheers:

ATA is dual x-flow? Curious what IS the air flow through the IC?

Come run with some of the high schoolers at Infineon. Quickest they are allowed in their class is 12 flat and a few are there.

 

[Norm]

Re: Another shop project finished up..SLEEPER!!!!

Re: Another shop project finished up..SLEEPER!!!!

very nice car, I sure like those old nova's

 

[onebadtwo]

Re: Another shop project finished up..SLEEPER!!!!

Re: Another shop project finished up..SLEEPER!!!!

I LIKE IT!
Makes me want to get my 64 running again, and miss my 66 sedan all at the same time.
Curtis

 

[sharkbait]

Re: Another shop project finished up..SLEEPER!!!!

Re: Another shop project finished up..SLEEPER!!!!

i wanna hump the dp

 

[sly dvl]

Re: Another shop project finished up..SLEEPER!!!!

Re: Another shop project finished up..SLEEPER!!!!

That is sick!!! I think that's the hip term, right?

 

[NecroWolf]

Re: Another shop project finished up..SLEEPER!!!!

Re: Another shop project finished up..SLEEPER!!!!

i'm going to have to stop in and see your shop next time i go home

 

[TYRODD]

Re: Another shop project finished up..SLEEPER!!!!

Re: Another shop project finished up..SLEEPER!!!!

Nasty, Very nasty! :thumbsup:

 

[Ry368]

Re: Another shop project finished up..SLEEPER!!!!

Re: Another shop project finished up..SLEEPER!!!!

Niiiiiiiiice!!! :tup: Man I can't wait to finish my little 67 now! The cage looks nice and i'm liking the flat black also.......looks schweet! :thumbsup:

 

[jhj]

Re: Another shop project finished up..SLEEPER!!!!

Re: Another shop project finished up..SLEEPER!!!!

Are You F___ing Kidding

 

[It's just a six]

Re: Another shop project finished up..SLEEPER!!!!

Re: Another shop project finished up..SLEEPER!!!!

Very nice.
Are you going to take it to a track soon?
Kinda small turbos for all out,but good for street manners?
LS6 heads,are those the Z06 heads?
Just wondering the spec on the cam?
Sleeper soud have 4.8 on the intake manifold

 

[eviltwin]

Re: Another shop project finished up..SLEEPER!!!!

Re: Another shop project finished up..SLEEPER!!!!

i need to go change my pants

 

[twin74s]

Re: Another shop project finished up..SLEEPER!!!!

Re: Another shop project finished up..SLEEPER!!!!

Thanks for the good words guys...Weve got a ton of time in this thing. Turbos are so responsive its not even funny....Makes 10psi before 3500rpm. Cam is just over .600 lift id have to look at the card again to be specific. LS6 and ZO6 are the same i believe...If the weather holds out it will be at KCIR tomorrow....This thing is and animal on 10psi on the street.

 

[Syclone #1721]

Re: Another shop project finished up..SLEEPER!!!!

Re: Another shop project finished up..SLEEPER!!!!

Dude, sleepers are so cool. I like the roll cage.

 

[Loeryder]

Re: Another shop project finished up..SLEEPER!!!!

Re: Another shop project finished up..SLEEPER!!!!

very nice!

I like the flat black as well.

Keep us informed on the times.

 

[Black Knight]

Re: Another shop project finished up..SLEEPER!!!!

Re: Another shop project finished up..SLEEPER!!!!

LS6 and ZO6 are the same i believe....

Yep, they are :tup:

That's F-ing cool

 

[blk00z28]

Re: Another shop project finished up..SLEEPER!!!!

Re: Another shop project finished up..SLEEPER!!!!

Maybe you can answer this. Why is it when I see a lot of twin turbo cars they mount the turbos the same way, why not use a reverse flow turbo on the other side so they both don't point in the same direction?

Seems to be it would look better, maybe even be easier to route things, that is unless there is some real reason??