700hp Dyno Video

JSM

JSM

Active member
Re: 700hp Dyno Video

typhoon92 said:
What's all in the motor?
Click to expand...

6 pistons, handful of rods, probably a camshaft thrown in, several bearings, penzoil and fram oil filter (ok nobody should use either of those), add some valves, springs, few bolts, bam 700 hp. :lol:

Sorry sarcastic side is coming out today.

Nice and clean dyno run, is that stock ECM?
 
0260IN3

0260IN3

Engine Builder
Re: 700hp Dyno Video

JS Manufacturing said:
6 pistons, handful of rods, probably a camshaft thrown in, several bearings, penzoil and fram oil filter (ok nobody should use either of those), add some valves, springs, few bolts, bam 700 hp. :lol:

Sorry sarcastic side is coming out today.

Nice and clean dyno run, is that stock ECM?
Click to expand...


Very Funny!

Eagle Rods, Forged Pistons, Stock Crank, Stock Block w/4 bolt caps, custom camshaft, fully ported vortecs.................and yes a stock ecm.

We just finished the last dyno pull (about 5 min ago)on the twin to this engine and we made more power than the first that you see in this video.

738hp / 904 ft.lbs @ 27psi (91 pump and methanol)

Yes, it does say 904 ft.lbs.:tup: :tup:
 
alwayscode390

alwayscode390

pppssssshhhhhtttttttttttt
Re: 700hp Dyno Video

HUGE turbo = hp .... nice to see an engine shop with an in-house dyno....all of them should have one!!! ---
 
0260IN3

0260IN3

Engine Builder
Re: 700hp Dyno Video

alwayscode390 said:
HUGE turbo = hp .... nice to see an engine shop with an in-house dyno....all of them should have one!!! ---
Click to expand...

not that big. only a 74.

But a good/big turbo helps lots
 
M

MikeRenz

not stock
Re: 700hp Dyno Video

are these motors going to FL by chance? pretty sick!

Whats dripping/leaking in the background during the first pull? water sprayer for the intercooler?
 
10secTy

10secTy

Sy-Ty builder and Tuner
Re: 700hp Dyno Video

Yep both to Florida. One is there already.

It looks like it is comming from the wastgate piping. Most likly water and meth in the exhaust. We run the air/fuel ratio at 9.5/1 with meth injection.

Nolan


MikeRenz said:
are these motors going to FL by chance? pretty sick!

Whats dripping/leaking in the background during the first pull? water sprayer for the intercooler?
Click to expand...
 
SY2455

SY2455

70's Veteran
Re: 700hp Dyno Video

JS Manufacturing said:
6 pistons, handful of rods, probably a camshaft thrown in, several bearings, penzoil and fram oil filter (ok nobody should use either of those), add some valves, springs, few bolts, bam 700 hp. :lol:

Sorry sarcastic side is coming out today.

Nice and clean dyno run, is that stock ECM?
Click to expand...

Hey,What happen to the lifter's?
 
SY2455

SY2455

70's Veteran
Re: 700hp Dyno Video

0260IN3 said:
Very Funny!

Eagle Rods, Forged Pistons, Stock Crank, Stock Block w/4 bolt caps, custom camshaft, fully ported vortecs.................and yes a stock ecm.

We just finished the last dyno pull (about 5 min ago)on the twin to this engine and we made more power than the first that you see in this video.

738hp / 904 ft.lbs @ 27psi (91 pump and methanol)

Yes, it does say 904 ft.lbs.:tup: :tup:
Click to expand...

Will my 700R4 hold up to this? :rotf: I'm sorry I don't feel well today.
 
W

wantingasy

Active member
Re: 700hp Dyno Video

Sweet, thats almost the exact build I want in a couple of years except I want a bigger turbo and billet crank. Oh yeah, I want you guys to build it too ;) :tup:
 
Matt

Matt

Active member
Re: 700hp Dyno Video

Great job, i think i better start saving for a build like this
 
It's just a six

It's just a six

Super Member
Re: 700hp Dyno Video

0260IN3 said:
Very Funny!

Eagle Rods, Forged Pistons, Stock Crank, Stock Block w/4 bolt caps, custom camshaft, fully ported vortecs.................and yes a stock ecm.

We just finished the last dyno pull (about 5 min ago)on the twin to this engine and we made more power than the first that you see in this video.

738hp / 904 ft.lbs @ 27psi (91 pump and methanol)

Yes, it does say 904 ft.lbs.:tup: :tup:
Click to expand...

Great numbers!!!

What methanol injection system are you using?
Thanks.
 
0260IN3

0260IN3

Engine Builder
Re: 700hp Dyno Video

It's just a six said:
Great numbers!!!

What methanol injection system are you using?
Thanks.
Click to expand...


The ONLY one.....................Alky Control from Julio.
 
You must log in or register to reply here.
Top