Search results

Mrweelr what do you mean by "gravity bleed your brakes"? I thought the way to bleed the brakes was to push the brake down , open the bleed screw, close the bleed screw and release the pedal. then repeat until clean fluid comes out and no air bubbles. Ty0279 why would it be wise to disconnect...

Ok I have reset the brake codes and now the abs light does not come on any more. I ran the engine and applied the brakes but the light remains off for now. So I may have needed to just reset the codes. I will repost if the light come on again. Is this something that happens from time to time...

Ok I was able to find the page that had the brake codes on it. I jumped A and H to get the brake codes. I get codes 14 and 45. I do not know why it would flash code 14 but I am guessing its the initiating sequence before it displayes the codes. Code 45 says to check grounds or the EHCU valve may...

I got the dreaded ABS light which is similar to the blue screen of death in windows. I did not do any brake work or anything like that. It just stayed on after I started the truck today. Now it will stay on continuosly every time I start the engine. The brakes work fine. No change in brake...

Yes Falco looks like I'm going to have to use a little force to move the cover up and out of the way. Just did not want to break it. :D Thanks, Ernest

I need help in removing the stock Sy mirrors. Once I remove the three screws that hold the plastic cover how do I remove the mirror. I see no way of getting to those screws in the back of the cover. The cover does not easily move out of the way. Before I break anything I thought I would ask...

Thanks! :D

My driving lights dimmer switch does not dim the gauge cluster lights. Do I need to buy the entire light switch or is the dimmer switch separate. Thanks, Ernest

Thank you all!!

Is this the right part number for the Jabsco pump? Part number: 59500-0012 12V I got it from the Jabsco web site http://www.jabsco.com/util_marine.asp

here you go http://www.turbotechnologyinc.com/ click install on the left and then the impala icon. 9396350 Impala/Camaro/TA LT-1 4 psi kit .....$3995.00 Ernest <font size=-1>[ This Message was edited by: eqs_sy on 2002-02-27 22:43 ]</font>

Well I just bought 91 OEM zr1 rear wheels with tires. They will fit perfect without spacers and are the correct offset 17x11 36mm offset 315x35x17 tire size. Check the corvette sites.

Ok I have found the info for original corvette wheels. Looks like they are the same offset for front 17x8.5 and 17x9.5 wheels. http://www.zr1.net/ZR1_suspension.html Front Wheel - Offset Tire size 17x8.5 56mm 255/45ZR17 Front Wheel - Offset Tire size 17x9.5 56mm...

Does any one know if the offset for the 93-96 OEM corvette 17x8.5 wheel is the same as the 17x9.5 OEM corvette wheel which is 56mm? I would like to use 17x8.5 in front and 17x11 in rear. Thanks, Ernest <font size=-1>[ This Message was edited by: eqs_sy on 2002-02-26 15:13 ]</font> <font...

Thank you all. Ernest

Thank you for the replies. So far I know that I can get S10 mirrors from previous years (do not know which year)...All the other mirrors I do not know if they bolt on. What about the M3 mirrors. Got any pics?. Do they bolt on? Cheers, Ernest

I would like to change the stock side mirrors with ones that are sleeker looking. I know I can replace them with the Typhoon mirrors but wanted to know what other model year mirrors BOLT ON the syclone without any door modifications. Thanks, Ernest