Recent content by Rob0102

  1. R

    idle again

    Re: idle again a little sitrap. changed ful filter, no luck, maybe a little higher fp. changed ignition module, no luck, no difference. used a biketube to check after leaks and i think maybe i found the spot. throttlebody leaks so mutch its hard to listen after another leaks. next work is to...
  2. R

    idle again

    Re: idle again ej, thanks for the replys. my dealer didnt have ignition module in stock but will arrive this wednesday :) yesterday i swapped 3bar map with one that was on it before my buildup.(also a 3bar old type) swapped and unplugged ecm20sec. startet up and then it was became even worse...
  3. R

    idle again

    Re: idle again all grounds look good, resetting block learn on ecm with the fuses off 20sec,, every time when i change fp or timing.. electric fan is working good when it needs to start. EVAP system is thrashed, vacum hose on throttlebody is plugged. will go buy me a new igniton module...
  4. R

    idle again

    Re: idle again yes, orginaly it was an ultimate chip but the former owner have reprogrammed it to more match the engine, works great. swapped to an ultimate to see if it helped but then it became even worse, and my electrical fans stopped working.. iell try to find an ecm,, but there is not...
  5. R

    idle again

    Re: idle again ye, its right 3barmap. gonna swap with a new spare tomorrow and see if it helps. ignition module its same old but i bet its working. tricky thing, i dont have a spare ecm to check :rant: codes.. well :-D ... almost all...? 12, 13, 14, 15, 21, 22, 23, 24, 25, 31, 32, 33, 34...
  6. R

    idle again

    hello, having big trouble with my idle and was hoping somebody experienced wanna help. its a newbuilt engine, bowtie, big heads, moldex crank and so on.. running nice and with power. before i swapped engine it was running nice idle and worked as it should, but now its running bad and sometimes...
  7. R

    pushrod length, help needed

    hello, my engine is nearing completion and now i get trouble with pushrods, was just waiting on it though. any got this combo; bowtie block, comp cam, 1.6 rockers and L35 heads, and know the length of pushrods ? wondering on going back to 1.5 but maybe i use this since i already got them, or...
Top