Turbo Time Chip

syclone1100

syclone1100

RUNNIN AND SELLIN
Whos got one, and how's it working for ya??? I picked mine up recently version V5-50# I got all the support mods to get in to the 11's hopefully walboro, 50# injectors, TQ converter, 3bar map, PTE 61,FMIC.. Any one have any tips on what setting works best for them on a similar setup??? or more detail on the exact fuel and timing??? I plan on adding alky later but if Im going to need it for the higher setting then I might get it sooner... any input helps....
 
gjp

gjp

another post whore
Re: Turbo Time Chip

Jeremy has a 60-1 turbo and alky. He runs his at 5 the last time I went for a ride with him. I have a stage 2 rpm turbo and run mine at 4-6 depending on what I see with the WBO2. I run 5 without the alky and I see 11.2-11.4 on the WBo2. With alky it will dip into the 10's so I set it down to 4. I have not tried the high adv. settings yet. Might with some torco in the tank. You can see my mods in my sig.
BTW Jeremy is in the 11's. I have yet to see the track but I should be close.
 
syclone1100

syclone1100

RUNNIN AND SELLIN
Re: Turbo Time Chip

Thats good to know I thought I was going to have to use the advance setting 8-F to do all that....
 
cloneman315

cloneman315

Active member
Re: Turbo Time Chip

thhat chip was dyno made on my truck i went i think it was 11.80s on a stock motor with just a pte 52 and injectors,but at the time the settings were different,
 
syclone1100

syclone1100

RUNNIN AND SELLIN
Re: Turbo Time Chip

E-RUE said:
thats because syty's require more than a 3rd grade education.

e
Click to expand...

Thats wrong funny but wrong... Mine will be going in the next few weeks once it cools down here, then Im off to do some logging...
 
turbodig

turbodig

Active member
Re: Turbo Time Chip

E-RUE said:
thats because syty's require more than a 3rd grade education.

e
Click to expand...


If any of us had any more than a 3rd grade education, we wouldn't own them.
 
You must log in or register to reply here.
Top