Front crossmember Modify. (room!)

[UR50SLO]

Here's what I did to the front of our Typhoon.

I ended up cutting out the front crossmember to give my self some room to work on the truck. This should be stronger than the factory peice and allow me to get to alot more stuff with out as much trouble.

Hope this helps someone. :tup:
Scott~

 

[QWERTYphoon]

Re: Front crossmember Modify. (room!)

You are like a mad scientist type. Looks awesome!

 

[turbodig]

Re: Front crossmember Modify. (room!)

You need to figure out a way to integrate the Jackstands... so they can be deployed at a moment's notice.

 

[bezerk]

Re: Front crossmember Modify. (room!)

You need to figure out a way to integrate the Jackstands... so they can be deployed at a moment's notice.

lol..an hydraulic jackstand and a couple of batteries and a pump.
nice job. you have a before pic?

 

[UR50SLO]

Re: Front crossmember Modify. (room!)

You need to figure out a way to integrate the Jackstands... so they can be deployed at a moment's notice.

Isn't that what Car Craft or Hot Rod did on a cover car a few times.. then they got busted?

I'll take a picture of the other Typhoon that's at the shop so you know what it looks like stock.. and the peices I cut out.
I'll Reeeee-post tomorrow
~Scott

 

[Don W.]

Re: Front crossmember Modify. (room!)

Add a quick release to the front diff and yur done! :rotf:

 

[Mtn Z]

Re: Front crossmember Modify. (room!)

You need to figure out a way to integrate the Jackstands... so they can be deployed at a moment's notice.

:rotf:

 

[GM TURBO]

Re: Front crossmember Modify. (room!)

Might as well just weld the jackstands in as they are. How long has it been on 'em?