Dog House Members

Status
Not open for further replies.

SyTynet Admin

Administrator
strada

Listing parts with vague descriptions in the incorrect forums with the intent to trick members. Extreme lack of communication after the transaction.
http://www.syty.net/forums/showthread.php?t=98470 (was originally listed in SyTy Parts forum)
http://www.syty.net/forums/showthread.php?t=98782

-----------------------------------------

sonomagt288
Rehoboth, MA 02769


Ripped off member, never sent payment for parts received. Will not respond to PM's, emails or calls. Do not deal with this member, buying or selling.

-----------------------------------------

lt1sy
Miami, FL


http://www.syty.net/forums/showthread.php?t=98146

Sellers descriptions have been disputable. Has had multiple deals with issues or have gone completely bad. Fails to ship parts in a reasonable amount of time. All members are urged to avoid transactions with this member, buying from or selling to, period.

-----------------------------------------

RenegadePete379
Miami, FL


http://www.syty.net/forums/showthread.php?t=83340

Seller has been less than accurate in his descriptions of parts he's selling. 5 members of this forum have been dissatisfied with the items they have received or never received them at all. A member of another forum has also been scammed for a large sum of money. This user is currently under investigation by his local authorities. It is strongly advised not to deal with this member under any circumstances.

-----------------------------------------

Carbon34 / Michael King - Pending Investigation

-----------------------------------------

SonomaGTlover - Jon Rust - Mirrado Graphics
O'fallon, IL


http://www.syty.net/forums/showthread.php?t=44994

Jon was selling vinyl decal kits as well as electric fan mounts to forum members and collected money for items he never delivered.
This is the second time Jon has fallen excessively behind on his commitments to the SyTy community.
At this time we do not recommend placing any orders with Mirrado Graphics or Jon directly until all of those who have yet to receive their orders are satisfied.

-----------------------------------------

CKEITH
Sells junk parts with fake receipts for performance parts, people think they are getting performance parts, but end up with junk. Also makes garbage aluminum radiator supports which break and case hundreds of dollars in damage. Do not purchase anything from this seller!

-----------------------------------------

Grant Webb /11secTy
Thread 1
Thread 2
Sold a box of junk to a board member, took to long to ship and lied about shipping method.

-----------------------------------------

Bill Hardifer / Syclone2882 a.k.a. gt67sy
Ripped off Board Member. Do Not Deal With *Finalized*

-----------------------------------------

Mark Pettograsso / mpettograsso
Thread 1
Sold parts to a member, shipped half and has yet to ship the remaining parts. Multiple contacts made with no response.
-----------------------------------------

Lannon Quintana / flyntyphoon69
Offers to buy parts, then backs out. Ignores PMs. Has had multiple shady deals go down. Do Not Deal With.

-----------------------------------------

Joe Nelson of Everett, WA (eBay ID is "nwminitrucks")
Threatens sellers after he screws up. Owns a Typhoon.

-----------------------------------------

Eric Mack / carpethead10 a.k.a. turboblue
Bought items and payed with paypal. As soon as item was shipped, Eric recalled his paypal payment, therefore receiving the item for free. * DO NOT DEAL WITH.
http://www.syty.net/forums/showthread.php?t=33975

-----------------------------------------

Will Robbins / SY#2910 a.k.a. BigWillie a.k.a. FLYN_BRICK a.k.a. Syclone0565 a.k.a. John B. Nesbeth
Sold multiple items including a bad turbo and an incomplete non-working alky kit and failed to reconcile with either buyer, claiming its not his fault. * DO NOT DEAL WITH.
http://www.syty.net/forums/showthread.php?t=35022
http://www.syty.net/forums/showthread.php?t=35038

-----------------------------------------

Michael Tibedeau / HotRodV6 / FirstGensForever
9351 Youngstown Place
Humble, TX 77396
(Possible current address as of 10/13)
7011 W Parmer Ln Apt 912
Austin,TX 78729-6954
firstgensforever@gmail.com
sytyspeedshop@gmail.com
HotRodV6@aol.com
AIM = HotRodV6
Phone 281-441-1258
Mobile 281-687-4168
Other 936-649-2334 (phone number Mike has listed on Craigslist as of 10/13)

LS1 eBrake setups
http://www.syty.net/forums/showthread.php?t=46412
Opened GP on 2/15/07
Collected over $2000 from syty.net members plus more from members of other online forums who have come here looking for answers as well.
Mike is claiming the hold up is on teh cables but has yet to ship bracket only orders or refund money to those sick of waiting.
As of 8/5/07 not one order has been completed or refunded.
It is not recommended to deal with this individual until he rectifies this situation.

-----------------------------------------

Chris Conadian / FLYNSUV
17555 via Valencia
San Lorenzo, CA 94580
(510) 755-3212

Multiple members out of money including wicked, goalie29 and odium who received faulty parts from user "FLNSUV". This guy has had a few other shady deals go down and doesn't return emails, PM's, or phone calls.

http://www.syty.net/forums/showthread.php?t=26770&page=2&pp=15
Another member saw the posting above and had this to add:
goalie29 said:
I had a deal go wrong with Flynsuv as well. It took just under 1 month to get a set of wires from him. He only shipped them after I filed a case with Paypal. He waited until the very last day to respond (the time limit for Paypal). I ultimately sent them back to him at my cost because I couldn't wait for 6 weeks to get a set of wires. I heard every excuse in the book when he actually did contact me.
-----------------------------------------

Keith Mease - South Jersey / Philly area - MPE, MPE Performance Fabrication
Has ripped off/scammed dozens of SyTy, Turbo Buick and Impala SS owners. Impossible to reach when he doesn't want to be found (or he's in jail), but does respond well to threats, lawyers and law enforcement. Deal with at your own risk, you have been warned.--

---------------------------------------

PEP Precision Engineering Performance
Ripped off multiple board members. Do Not Deal With *Finalized*

-----------------------------------------

Tony DeQuick - Chicago, Illinois area
Formerly of Charged Air Systems (CAS). Sells radiators, CAC's, etc. Does not ship parts in a timely manner. Does not reply to emails. Does shoddy work. Has a very poor eBay feedback rating and changes his Ebay ID frequently. Has been banned from PayPal. Bad reputation in many automotive arenas, turbo Buicks, LS1's, SyTy's, etc. DO NOT DEAL WITH.

-----------------------------------------

Torrey Ward - Owner of Syclone - Cell (805) 573-8400 (Aug 01)
SyTy owner. According to a SyTy Vendor who built a motor for Mr. Ward, he has not paid his balance due on the labor/parts for the engine build. According to the SyTy Vendor, Mr. Ward was taken to small claims court for the outstanding balance. The court ruled in favor of the Vendor, but Mr. Ward still hasn't paid. Other vendors should proceed with caution when dealing with Mr. Ward.

-----------------------------------------

Conley Performance
fivetodrive said:
Conleys Performance Houston TX

I picked up a Typhoon in Texas that had a $5000 dollar rebuilt engine from Conley performance with only 1500 miles on the rebuild. And a warranty on his workmanship... When I test drove it it ran great so I bought it. 250 miles later a rocker arm stud broke (looks like it was over-torqued according to every shop I took it to) and it pretty much killed the engine.

When I got it home and I started to remove the engine not one the six bolts holding the engine to the tranny was tight. Not even the motor mount bolts were tight. I was able to remove the bolts with my fingers. It was the first time I had all six extensions on my air-ratchet ready to go. Even after many calls Chris Conley still says that the failure wasn't his fault the stud just broke...

My favorite line was when he told me he was glad that the mechanic that worked on my Ty doesn't work for him any longer.

The rebuild was shit as well. When I pulled the pistons out they were so tight on the rods that the rod would sit straight up when the piston was laid flat on the counter...

Also here is another page with some more info on Conley...

http://ras001.0catch.com/s10/s10.htm#CPP
-----------------------------------------

To report other deadbeat members you feel are candidates for the Dog House, PM Ty0279.
 
Status
Not open for further replies.
Top