K
kdan83
Guest
The subject line says it all...
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
PPI Typhoon
DIY Madman
I've only been down here a while and haven't had a need for major repairs on my Ty yet, but I did take my Ty to a local shop when I had a wiring harness problem. Everyone had a fit hearing that I took my Ty to a primarily Ford mechanic, but he was quick and honest. It was called Turbo RX and is in Chandler off Chandler Blvd. I picked that shop because when I drove up, he had classics and modern muscle cars in the bay, which is what he specializes in. Their number is 480-961-4878.
By the way, welcome to the boards!
By the way, welcome to the boards!
Welcome...
We (Turbo 6 guys) usually work on our own cars/trucks to do simple stuff. I really depends on your problem/application.
Tranny - Talk to Bob at AAMCO (SW corner of Cave Creek and Cactus), he's a GN owner and specializes in beefing up 700R4s and 200R4s. He has done pretty much ever Turbo Regal and Syclone race tranny out here in AZ.
Engine Builder - Talk to Joe at TOTAL MARINE (Just south of Rio Salado on McClintock). He's built almost every fast turbo car in AZ as well. He also owns a low 9-second Malibu which he built...
General Turbo Advice (or brakes) - Email Rick Elam at Baer Brakes (ricke@baer.com), he seems to be one of the most knowledgable people as far as turbo vehicles go. He has answers to just about every technical question I ask him. And we get VERY technical... If you show up at the Pavillions car show on any Saturday, we'll both be there for sure...
Turbos - Call up John Craig at Limit Engineering. He's out in Lake Havasu, and he pretty much wrote the book on turbos.
Hope this helps give you a start,
Brandon
ASM Sy #1151
We (Turbo 6 guys) usually work on our own cars/trucks to do simple stuff. I really depends on your problem/application.
Tranny - Talk to Bob at AAMCO (SW corner of Cave Creek and Cactus), he's a GN owner and specializes in beefing up 700R4s and 200R4s. He has done pretty much ever Turbo Regal and Syclone race tranny out here in AZ.
Engine Builder - Talk to Joe at TOTAL MARINE (Just south of Rio Salado on McClintock). He's built almost every fast turbo car in AZ as well. He also owns a low 9-second Malibu which he built...
General Turbo Advice (or brakes) - Email Rick Elam at Baer Brakes (ricke@baer.com), he seems to be one of the most knowledgable people as far as turbo vehicles go. He has answers to just about every technical question I ask him. And we get VERY technical... If you show up at the Pavillions car show on any Saturday, we'll both be there for sure...
Turbos - Call up John Craig at Limit Engineering. He's out in Lake Havasu, and he pretty much wrote the book on turbos.
Hope this helps give you a start,
Brandon
ASM Sy #1151
PPI Typhoon
DIY Madman
Bah, that Brandon doesn't know a damn thing. Just buy a motor from Checker and you'll be good. Dump the turbo and go with NNNNNAAAAAAAAAWWWWWWWWWWSSSSSSSSSSSS and a HUGE tailpipe. Then you'll be cool
Oh, and don't forget the running boards. :grin:
Oh, and don't forget the running boards. :grin: