Search results

Re: '96 4.3 vortec build Well ended up w/Milodon 45600 1.94 intake and Milodon 45045 1.60 for exhaust. Getting closer to breaking her open! I have to make a detour through LA and rebuild the 4spd transaxle in my daughters '83 Vanagon =) and my annual visit with my daughter-for a record 18...

Re: '96 4.3 vortec build I found these 1.55 exhaust valves that have the right length and tips for self aligning vortec heads . Alex's parts has been around for a long time and has very good reviews. He is a machinist and will deal directly with you-not a sales rep! That is worth a lot of...

Re: '96 4.3 vortec build Hey Dave, I'm sticking with the 1.94 but what valve did you use to get the 1.56? I was figuring on buying new valves for the rebuild, at least exhaust valves-was wondering about going up to 1.60? Thanks. Good times! Bruce

Re: '96 4.3 vortec build Thanks for the pic Dave! After looking at part numbers, looks like there is a different #'s every time there was any change. Doorman, Powerbond, and ACDelco all have oem type replacements. Good times! Bruce

Re: '96 4.3 vortec build I'm pretty sure the crank pushes up against the reluctor ring which uses the same crankshaft woodruff key for indexing as the balancer/damper, through the seal in the timing cover-the crank goes into the timing cover and is sealed by the front crank seal in the timing...

Re: '96 4.3 vortec build So I have come to grips with going 4 bolt just to have it as we all know what happens. So 2 splayed billet steel sbc 350 4 bolt aftermarket mains are what I need for the inboard mains? And a Howards billet front cap? Strap on the rear cap? Good times! Bruce

Re: '96 4.3 vortec build Is there a performance Harmonic balancer that will replace the stock '96 damper? I want a more durable piece because my ProCharger centrifugal is driven from the pulley mounted to the balancer so a nice steel unit sounds good. This has the reluctor ring for the crank...

Re: '96 4.3 vortec build I think I'm going with the Cloyes C-3211 or 9-3654x3 vs the oem roller chain. http://www.cloyes.com/Images/CloyesHP_Catalog.pdf Now about the bottom end and using the stock crank; I read that "500HP" is the number many use to include 4 bolt mains. What is the best...

Re: '96 4.3 vortec build Yea those are the exact parts I have - and figured on using based on the point that the balance shaft and gears take up a lot of space. But then balance shaft/gears delete still has an issue with the reluctor ring and crank sensor, and the plastic front cover from what...

Re: '96 4.3 vortec build What timing sets are being used on '96up Vortec obd2 builds? And does the balance shaft affect the use of double roller timing set? Good times! Bruce

Re: '96 4.3 vortec build Thanks for the photos Don! I have a box of pictures at my son's in St Petersburg but not much on my laptop. You speak my language my friend! I got my ticket in 1982 learning to fly in the mountains of Colorado. I have worked on a Piper Arrow installing speed mods...

Re: '96 4.3 vortec build Dave I hear ya there! I have had a few learning burps in my tuning with this motor too. I will just have to wait until tear down to tell for sure. Thanks! Good times! Bruce

Re: '96 4.3 vortec build Hello Don! I was Pt135 scheduled from PHX to SEZ (Phoenix to Sedona) and also SFAR50 (Grand Canyon) from '85 to 89-then on my own. I use to fly our company route 3,000' below the rim of the canyon on our FAA deemed senic route. When I quit that company-Air Sedona...

Re: '96 4.3 vortec build Hey Dave, thanks for your added information! My engine would shift at 4,900 before the s/c install. The ProCharger pulled (or pushed) the extra rpm's out of the cam! The shift point I am referring to is my 700r4 auto shift point and not a manual shift point-just for...

Re: '96 4.3 vortec build Hey dgoodhue thanks for your time and info! I have done research for a very long time and I think I have a sane plan for a solid 350-375 horse 10psi motor. The head studs I'm looking at have an allen head socket on the end of the stud to install/uninstall the stud...

Re: '96 4.3 vortec build Hey thanks for your opinion. I felt the same about incinerating the qtip but have been inching toward this build for a while now, collecting parts here and there. Mostly using the q-tip as an excuse! The 1.6 full roller rocker arms with my cam will give me .461...

I'm buying parts for my rebuild and am needing to verify a few items and open to any and all help. Im running a intercooled ProCharger P1sc and have for over 30,000 trouble free miles using a marine manifold conversion and '0411 pcm in my '91 Blazer. This site and you people have some of the...

Re: Brake upgrade options How did you mod the prop valve for the rear? I found a 2002 Blazer Extreme at a yard and used the front and rear disc setup off that, front dual cyl caliper and larger disc and all bolted up and I used the 2002 lower control arms also because I wanted the 33mm front...

I need the windshield washer reservoir dimensions PLEASE! I'm 3,000 miles from my ride reworking some things on paper and need dimensions. Good times! Bruce

Re: Vortec intake options Here is a way to make the 2114 a forward mount tb; http://www.ebay.com/itm/Edelbrock-Throttle-Body-Intake-Elbow-3848-/390984809732?pt=Motors_Car_Truck_Parts_Accessories&hash=item5b0882bd04&vxp=mtr