Search results

  1. H

    Boost wacky Why?

    you have to run a afpr with the ultimate because the fp has to be turned up to 50 psi base with the afpr vav line unpluged from the reg. more than likely you are getting knock real baddd :o
  2. H

    Cruise control, can i remove it ??

    plug the vac line at the intake 1 less chance for a vac leak
  3. H

    O2 mv really low on the DM

    sterm looks real lean and you have like 3 times that you have data errors how long sence fuel filter change
  4. H

    How fast can stock ECM, INJ & Turbo go?

    its a little bigger than a 20g. the times were on 14psi with 93 octane exon. Just wander if an ultimante and 110 octane would help???? its a sy
  5. H

    How fast can stock ECM, INJ & Turbo go?

    how did you get it that fast I have a te44 and can only get 12.8 to 12.9 and I only have 1.4 deg of nr at the top of 1st and thats it 1.74 60" :cry:
  6. H

    Liquid to Air mixtures

    deleat the egr worth at least 20 deg
  7. H

    02 ss

    te44,pitbull,walbaro,afp,3"dp,atr wg,coldair kit,and a 2 gal. cooler in the bed full of ice . dont laugh my ia temps are in the lower 70s on a 95 deg day at the track 8)
  8. H

    02 ss

    12.8 to 12.9 on 14 psi
  9. H

    02 ss

    run a 02 SS this morning from a dead stop Left on 4psi and beat him to about 100 then had to lift 8) I dont think he had ever seen a sy launch but now he has dont think he will come back for more 8)
  10. H

    data master run

    would some one thak a look at a couple and see what you think
  11. H

    How Much ET

    I am already doing 12.80 to 12.9 with the pitbull on 14 psi with a te44
  12. H

    How Much ET

    how much et is the ultimate worth on the t1 15 or t3 20 over a pittbull am thinking about getting one
  13. H

    ATR 20lb spring for wg

    use a diegrinder on the wastegate outlet of the turbo you can inlarge it to about 1 1/4" to 1 1/2" that alows the wastegate to vent more exaust and you souldnt get boost creep as bad. the one on my turbo was only 3/4" and I was getting creep real bad now it is solid. also going up on spring psi...
  14. H

    what should my plugs be gaped at?

    how is knock retard I went to .032 and lost some give it a try it's only time and skin :roll:
  15. H

    ATR 20lb spring for wg

    have you ported the wg hole coming out of the turbo ? I had boost creep until I did that now I have rock solid boost with the atr wg on a te44 The base boost is going to be about 2 psi below spring rate with the atr gate you have to dick with it alot to get it right.. nothing a little beer...
  16. H

    Total abuse

    went to the new track in little rock sat. for test &tune and abused 2 SS,1 02 ta and many more 7 total 8) best pas was 8.25@83 on 14psi. then went back sunday for street elem. .400 tree heads up run what you brung so I thought :evil: after a day of beating mudstains,nova's,elcamenos, and...
  17. H

    Lterm on dm

    my Lterm is 138 and i cant seem to get it to go down Sterm is 128 . I have tried raising fp and no change what could it be :-?
  18. H

    new track

    just found out that we have a track in Little Rock AR it is a syty dream come true it is only 500' long I do believe I will go and show them what a sy can do in the street radial class :lol: also found out that they are going to build a 1/4 mile here in town that takes a lot of driving of the...
  19. H

    Aftermarket Headers, DP and WG

    thas just not fair
  20. H

    wg question

    what is the difrence between atr's wg and everybody else wy do you have boost control problems with atr wg would it help to mount it on the crossover pipe if not will any outher wg fit an atr 3" dp
Top