Official "Who is comming to the Shindig" thread!!!
- Thread starter 420
- Start date
sytyguy
Moderated User
Re: Official "Who is comming to the Shindig" thread!!!
This is why I still think we need to just set up the course in the Hospital parking lot.
sytyguy
Moderated User
SYO237
SyTy Registry
Re: Official "Who is comming to the Shindig" thread!!!
I dont know how to tune Code59, but I can sure break a truck if need be.
I dont know how to tune Code59, but I can sure break a truck if need be.
Daron
Active member
Re: Official "Who is comming to the Shindig" thread!!!
I am not a guru, but I am now in the process of re-learning how to tune my truck again. I have Code59 running in the sy and should I make it to the shindig, I may be able to at least show folks some basics. Jeff will be there and at the Code 59 Chip signing booth. Maybe folks can squeeze in a tutoring request in between his music video production takes?
I am not a guru, but I am now in the process of re-learning how to tune my truck again. I have Code59 running in the sy and should I make it to the shindig, I may be able to at least show folks some basics. Jeff will be there and at the Code 59 Chip signing booth. Maybe folks can squeeze in a tutoring request in between his music video production takes?
SYO237
SyTy Registry
Re: Official "Who is comming to the Shindig" thread!!!
Actually....this is a good time to bring this up.
Me and Hood talked the other day about him and hopefully Jeff sitting down and doing a tech session on Code59. Sometime during the weekend. I think its something alot of us can benefit from. I know I definitely learn better when someone is pointing and explaining in front of me rather than just reading and then trial and error.
Hood did a little tech session on datamaster and chip burning a few meets back in his hotel room that was awesome.
Theres quite a few people wanting to get Hood or Jeff in their truck for tuning. Maybe doing a tech will help us Code59 noobs out, but also give Hood and Jeff a bit of a break trying to get everyones truck running perfect.
Actually....this is a good time to bring this up.
Me and Hood talked the other day about him and hopefully Jeff sitting down and doing a tech session on Code59. Sometime during the weekend. I think its something alot of us can benefit from. I know I definitely learn better when someone is pointing and explaining in front of me rather than just reading and then trial and error.
Hood did a little tech session on datamaster and chip burning a few meets back in his hotel room that was awesome.
Theres quite a few people wanting to get Hood or Jeff in their truck for tuning. Maybe doing a tech will help us Code59 noobs out, but also give Hood and Jeff a bit of a break trying to get everyones truck running perfect.
Mario65
Hotrodicus Supersonicus
Re: Official "Who is comming to the Shindig" thread!!!
This is perfect. I am just getting into this tuning thing and I can tell you if MAV87's tune is an indication of how good code59 is, we all need to get up to date on it. It straightened out my truck and he has some incredibly quick times.
I am in for the tech session and I'd like to be the first to say my truck is open for tuning.
Heck I don't mind paying for the tech session.
This is perfect. I am just getting into this tuning thing and I can tell you if MAV87's tune is an indication of how good code59 is, we all need to get up to date on it. It straightened out my truck and he has some incredibly quick times.
I am in for the tech session and I'd like to be the first to say my truck is open for tuning.
Heck I don't mind paying for the tech session.
clone 94
New member
Re: Official "Who is comming to the Shindig" thread!!!
i may have to back out of the show
my truck has alot of blowby after some WOT datalogging a week or so ago. i had valve cover breathers and they were puffing white smoke pretty badly afterwards. white smoke out the tail pipe also at idle. i put a PVC system on it with a home made catch can as a band-aid and its still smoking pretty badly out the exhaust. i pulled the plugs and the #6 appeared to have oil on it.
i am going to pull the passenger side head and hope its a head gasket. if it is I'll replace it and try to make it to the shindig. i doubt its a head gasket though, if you plug the valve cover hole with your hand it builds up a good amount of pressure. this is exactly why i didnt register early lol
might be time to put the new motor in
Adam, i'll still take the shirt
i may have to back out of the show
my truck has alot of blowby after some WOT datalogging a week or so ago. i had valve cover breathers and they were puffing white smoke pretty badly afterwards. white smoke out the tail pipe also at idle. i put a PVC system on it with a home made catch can as a band-aid and its still smoking pretty badly out the exhaust. i pulled the plugs and the #6 appeared to have oil on it.
i am going to pull the passenger side head and hope its a head gasket. if it is I'll replace it and try to make it to the shindig. i doubt its a head gasket though, if you plug the valve cover hole with your hand it builds up a good amount of pressure. this is exactly why i didnt register early lol
might be time to put the new motor in
Adam, i'll still take the shirt
JSM
Active member
Re: Official "Who is comming to the Shindig" thread!!!
You stand on a trailer with Jeremy driving and see how it goes. Or I could hope Dobrick was driving, o yea that is probably worse. Either guy would be trying to get years of revenge on me for anything they could think of within the first 10 miles of me attempting that feat.
You stand on a trailer with Jeremy driving and see how it goes. Or I could hope Dobrick was driving, o yea that is probably worse. Either guy would be trying to get years of revenge on me for anything they could think of within the first 10 miles of me attempting that feat.
Ian Turgeon
Cascading Inspiration
Re: Official "Who is comming to the Shindig" thread!!!
So wear a helmet pussy. :tup:
So wear a helmet pussy. :tup:
Re: Official "Who is comming to the Shindig" thread!!!
I seem to remember standing on the forks of Jeremy's forklift at ~25+ feet off the ground with you at the controls. You're damn right I'll be exacting some revenge if you hop on that trailer while we're moving!
I seem to remember standing on the forks of Jeremy's forklift at ~25+ feet off the ground with you at the controls. You're damn right I'll be exacting some revenge if you hop on that trailer while we're moving!
