A long and winding road it has been but it is time for her to go. Truck is way built I'll have to post a full parts list but here is the general idea. This truck is NOT for the squeemish it is a race truck. No engine management system, I was trying to run the TEC3 but it turned out to be a waste of time and money. For those of you who aren't familiar my truck has so much into it it's a step or two away from going 10's easy and not too far off from 9's. Too much going on these past few years I can't keep it going, I hate too see it end but one mans loss is another mans gain. Things are tough out there but if you have the money and want a truck with sick parts ready to go and you have the know how its a steal. Not going to last long as one piece, if it doesn't go in a few weeks I'll part her out. Truck made 600HP and 800LBS of tourqe at 6000RPMS and only 10PSI, should make over 900HP and TQ without much effort. If you have any questions please email me at raketich@gmail.com. Make me an offer. Thanks.
92 Ty Blk/Blk
Completely rewired w/painless wiring kit
6 point roll cage, swing out door bars
281 ci Oddfire V6 Dry Sump Oiling
Motor is Bowtie Block 4.1 bore 3.55 crank, Carrillo Rods, 18 degree heads with RPM headers, 18 degree intake, Lingenfelter Upper intake, Lingenfelter Throttle Body, Jesel 1.6 Rockers. Motor built professionally by Ultratech, 4 bolt mains.
76GTQ Ball Bearing Turbo
Huge Custom Intercooler
4L80e Full Race Build
NP205 Tranfer Case In cab shifter
9 Inch Rear end
4 Link Rear suspension
Baer Breaks
ZR-1 Wheels
Jaz Fuel Cell
QA1 Shocks all around
Racegate
Lots of AN tubing, oil and gas
Tons of guages
Tons of custom work
Seriously way too much custom work to explain, again this truck is not for the weak at heart. The body is in good shape, paint is average but needs to be cleaned up. Cost to build this truck on your own approximately $80K. Lots of peeps going to be angry with me on this one but it is what it is.
92 Ty Blk/Blk
Completely rewired w/painless wiring kit
6 point roll cage, swing out door bars
281 ci Oddfire V6 Dry Sump Oiling
Motor is Bowtie Block 4.1 bore 3.55 crank, Carrillo Rods, 18 degree heads with RPM headers, 18 degree intake, Lingenfelter Upper intake, Lingenfelter Throttle Body, Jesel 1.6 Rockers. Motor built professionally by Ultratech, 4 bolt mains.
76GTQ Ball Bearing Turbo
Huge Custom Intercooler
4L80e Full Race Build
NP205 Tranfer Case In cab shifter
9 Inch Rear end
4 Link Rear suspension
Baer Breaks
ZR-1 Wheels
Jaz Fuel Cell
QA1 Shocks all around
Racegate
Lots of AN tubing, oil and gas
Tons of guages
Tons of custom work
Seriously way too much custom work to explain, again this truck is not for the weak at heart. The body is in good shape, paint is average but needs to be cleaned up. Cost to build this truck on your own approximately $80K. Lots of peeps going to be angry with me on this one but it is what it is.