Bob galla pipe?
- Thread starter DRUNK411
- Start date
hatrik8
Donating Member
Re: Bob galla pipe?
Do you guys know if this would work?
http://cgi.ebay.com/ebaymotors/2-5-...036917482QQcmdZViewItem?hash=item310036917482
Do you guys know if this would work?
http://cgi.ebay.com/ebaymotors/2-5-...036917482QQcmdZViewItem?hash=item310036917482
SY2932
Administrator
Re: Bob galla pipe?
You could use that but you are going to need reducing couplers on both ends since hardpipes are usually 2" OD.
"Bob Galla stainless steel turbo to intercooler pipe and HKS Super Sequntial Blow Off Valve I ran with stock turbo. Now sold to someone else."
DRUNK411 said:
You could use that but you are going to need reducing couplers on both ends since hardpipes are usually 2" OD.
"Bob Galla stainless steel turbo to intercooler pipe and HKS Super Sequntial Blow Off Valve I ran with stock turbo. Now sold to someone else."
Tooky
Serious about performance
Re: Bob galla pipe?
My truck came from the previous owner with the official Bob Galla pipe. I found it to be a total bitch to remove when I needed to service the turbo or intercooler etc. Since I went to the rubber AutoZone radiator hose my life has been easier. Just a caveat you perhaps weren't aware of.
My truck came from the previous owner with the official Bob Galla pipe. I found it to be a total bitch to remove when I needed to service the turbo or intercooler etc. Since I went to the rubber AutoZone radiator hose my life has been easier. Just a caveat you perhaps weren't aware of.
Tooky
Serious about performance
Re: Bob galla pipe?
No you are absolutely right. Sorry I made it sound worse than it really is - it's just harder obviously to maneuver a solid pipe than a flexible one, when the turbo is mounted solid and the stock intercooler has a half dozen mount points itself.
No you are absolutely right. Sorry I made it sound worse than it really is - it's just harder obviously to maneuver a solid pipe than a flexible one, when the turbo is mounted solid and the stock intercooler has a half dozen mount points itself.
Flyin Ryan
hated cuz he drives fords
Re: Bob galla pipe?
Yea I believe both are 2"
and you could always do something like this
Not my picture and isn't my style but it's an idea
Yea I believe both are 2"
and you could always do something like this
Not my picture and isn't my style but it's an idea
ghettosled
SYTY SUPERSTORE
Re: Bob galla pipe?
you need a 2" OD pipe and it *should* be on a 2" centerline radius otherwise you will be clamping on the bend radius and the fit is poor. We just had (100) 2" 90 deg bends bent up on a 2" CLR (6061 T6 .065 aluminum), so if you are a DIY'er i can sell them for $20ea. You will just have to cut, trim, deburr, and beadroll the pipe.
The polished bends on ebay are from China and do not weld as well as the USA milled finish. Keep that in mind with the BOV, make sure you have someone that can tig weld aluminum for the flange.
you need a 2" OD pipe and it *should* be on a 2" centerline radius otherwise you will be clamping on the bend radius and the fit is poor. We just had (100) 2" 90 deg bends bent up on a 2" CLR (6061 T6 .065 aluminum), so if you are a DIY'er i can sell them for $20ea. You will just have to cut, trim, deburr, and beadroll the pipe.
The polished bends on ebay are from China and do not weld as well as the USA milled finish. Keep that in mind with the BOV, make sure you have someone that can tig weld aluminum for the flange.
