Interest in a mini wrench fest before NATS?

[SEL777]

I'm looking to see if anyone is interested in a mini-wrench session SAT 9-1 before NATS. If so post up. I am willing to host something small but I do NOT have air power or speciality type tools. If it is HOT then it'll be hot in there too..sorry no ac just an old fan. I could use some help with my Borgenson shaft install. I've got room in the car hole for three trucks.

 

[SEL777]

Re: Interest in a mini wrench fest before NATS?

Ttt

 

[sy#2921]

Re: Interest in a mini wrench fest before NATS?

Im willing to stop by and help out. Truck wont be there though. If no one has shown any interest send me a PM of you address and we can make some plans. I just did my steering shaft install and its not that bad.

 

[supersports10]

Re: Interest in a mini wrench fest before NATS?

I'm looking to see if anyone is interested in a mini-wrench session SAT 9-1 before NATS. If so post up. I am willing to host something small but I do NOT have air power or speciality type tools. If it is HOT then it'll be hot in there too..sorry no ac just an old fan. I could use some help with my Borgenson shaft install. I've got room in the car hole for three trucks.

hmmmm...... interesting......

 

[SEL777]

Re: Interest in a mini wrench fest before NATS?

hmmmm...... interesting......

I promise to let you eat something this time Clint!! Are you going to NATS?

 

[supersports10]

Re: Interest in a mini wrench fest before NATS?

I promise to let you eat something this time Clint!! Are you going to NATS?

unfournately.... no... i have to work that saturday, and the last trip to homecoming cost me $1000 plus:rant: :roll:

it almost broke me in fuel expenses alone!!

 

[SEL777]

Re: Interest in a mini wrench fest before NATS?

Working on SAT sucks! For those who may be interested in stopping over I have only until around 2PM on SAT but, I can start early if there is a need. I know there is someone out there who needs something done. It won't be THAT hot in the car hole....anyone?

 

[TYHOGG]

Re: Interest in a mini wrench fest before NATS?

I don't have much going on this weekend. I'm in the plainfield area. I think you came to the wrench session i few of us had a while ago, we replaced your mounts and intercooler pump.

 

[Loeryder]

Re: Interest in a mini wrench fest before NATS?

Shit that last 2 weeks has been a last minute wrench session for me. lol

Still have the long weekend to bang out some more, but it wont be the first or last time I am wrenching in the parking lot at Nats.

The steering shaft is a gravy job.
You won't need much for help.
I did the borgensen with needle bearing u joints in my Ty and love it.
Just need to pull it back out for a coat of rattle can black. :tup:

 

[SEL777]

Re: Interest in a mini wrench fest before NATS?

I don't have much going on this weekend. I'm in the plainfield area. I think you came to the wrench session i few of us had a while ago, we replaced your mounts and intercooler pump.

Yea, that me! You're back, didn't you move somewhere down south?

 

[SEL777]

Re: Interest in a mini wrench fest before NATS?

Shit that last 2 weeks has been a last minute wrench session for me. lol

Still have the long weekend to bang out some more, but it wont be the first or last time I am wrenching in the parking lot at Nats.

The steering shaft is a gravy job.
You won't need much for help.
I did the borgensen with needle bearing u joints in my Ty and love it.
Just need to pull it back out for a coat of rattle can black. :tup:

I have to get my Borgensen unit in. It should go well with the ZQ8 and FS Bar urethane bushings I did before NATS 9. So I guess I'll see you at NATS X.

 

[TYHOGG]

Re: Interest in a mini wrench fest before NATS?

Yea, that me! You're back, didn't you move somewhere down south?

Yeah i moved down to Florida (Sarasota") for about 2 years. Got sick of it pretty quick and decided to come back. A lot more work up here and i love my new job. Let me know if you want to do something. If i have the free time i'm gonna get our 2 new lifts wired up this weekend.

 

[sy#2921]

Re: Interest in a mini wrench fest before NATS?

i'm gonna get our 2 new lifts wired up this weekend.

That sounds like a true syty'er getting lifts ready for all the broken trucks in the area. Plainfield isnt that far away :tup: