warmpancakes
New member
I need a picture of the Map sensor wiring plug, a top shot and a side view showing the wires would be excellent
Picture needed
- Thread starter warmpancakes
- Start date
turbodig
Active member
Re: Picture needed
Not a picture, but it gives the A/B/C and the colors of the wires...
http://mattw.dyndns.org/pics/Clone_...ring_Diagrams/syclone_ecm_wiring_diagram1.jpg
The connector shell has different keying than a normal weatherpack, is all.
Not a picture, but it gives the A/B/C and the colors of the wires...
http://mattw.dyndns.org/pics/Clone_...ring_Diagrams/syclone_ecm_wiring_diagram1.jpg
The connector shell has different keying than a normal weatherpack, is all.
warmpancakes
New member
Re: Picture needed
I know the keyings is different I need to modify a connector to fit
I know the keyings is different I need to modify a connector to fit
turbodig
Active member
warmpancakes
New member
Re: Picture needed
yep Thanks
yep Thanks
warmpancakes
New member
Re: Picture needed
Gm makes a pigtail, but its like 15.00 and Im too cheap for that , There is just a connector made but its orange Whiteracing sells them, Mine was a "sample" from a buddy ill see if I can get another sampled to me
Gm makes a pigtail, but its like 15.00 and Im too cheap for that , There is just a connector made but its orange Whiteracing sells them, Mine was a "sample" from a buddy ill see if I can get another sampled to me
JSM
Active member
Re: Picture needed
Yea, I went to plug in my 3 bar last night into my typhoon, and noticed that connector got "borrowed" for another project at some point. Can't remember where now but no plug.
Also if anybody knew what a 96ish ford must TPS plug was called, I need the harness side connector for that also.
Yea, I went to plug in my 3 bar last night into my typhoon, and noticed that connector got "borrowed" for another project at some point. Can't remember where now but no plug.
Also if anybody knew what a 96ish ford must TPS plug was called, I need the harness side connector for that also.
warmpancakes
New member
Re: Picture needed
96 Mustang? what motor I can get you a ford part number or I can snatch one next time im at the pick a part
96 Mustang? what motor I can get you a ford part number or I can snatch one next time im at the pick a part
warmpancakes
New member
Re: Picture needed
application cant be correct, I pulled the print for a 96 F150 TPS and it shows a square connector, I do have a GM TPS connector it you wanna convert the Ford to a GM style. Als GM used the same style sensor we had to slot the ends to dial it in
application cant be correct, I pulled the print for a 96 F150 TPS and it shows a square connector, I do have a GM TPS connector it you wanna convert the Ford to a GM style. Als GM used the same style sensor we had to slot the ends to dial it in
JSM
Active member
Re: Picture needed
I can tell you it seems no 2 stores, books agree on what tps sensor goes on. I ended up taking the wilson throttle body in to the store, and had them pull sensors until it fit right.
I know it looks just like that picture I posted, and that is the part #. I think is a wells #.
I can tell you it seems no 2 stores, books agree on what tps sensor goes on. I ended up taking the wilson throttle body in to the store, and had them pull sensors until it fit right.
I know it looks just like that picture I posted, and that is the part #. I think is a wells #.
JSM
Active member
Re: Picture needed
Look up a 96 ford F150, 351 engine.
Wells tps sensor TPS267
Going to hit up napa tonight, see what they can do. Asking for a connector at the run of mill autoparts stores is like asking for a flux capacitor sold in bulk. You get a very blank stare.
I thought about changing the tps connector, but then I would need to do that if I change the sensor and I need to lengthen the connector on my stock harness anyways since my throttle body isn't even close to the same spot it was stock.
Look up a 96 ford F150, 351 engine.
Wells tps sensor TPS267
Going to hit up napa tonight, see what they can do. Asking for a connector at the run of mill autoparts stores is like asking for a flux capacitor sold in bulk. You get a very blank stare.
I thought about changing the tps connector, but then I would need to do that if I change the sensor and I need to lengthen the connector on my stock harness anyways since my throttle body isn't even close to the same spot it was stock.
warmpancakes
New member
Re: Picture needed
heres the sensor you need that style with the GM connector
http://cgi.ebay.com/ebaymotors/ACCEL-DFI-BILLET-THROTTLE-BODY-1550CFM-74202S2_W0QQcmdZViewItemQQcategoryZ33558QQihZ009QQitemZ190139802406QQrdZ1QQsspagenameZWDVW
heres the sensor you need that style with the GM connector
http://cgi.ebay.com/ebaymotors/ACCEL-DFI-BILLET-THROTTLE-BODY-1550CFM-74202S2_W0QQcmdZViewItemQQcategoryZ33558QQihZ009QQitemZ190139802406QQrdZ1QQsspagenameZWDVW