More Pictures of ViciousV6
- Thread starter ViciousV6
- Start date
QWERTYphoon
Motley Driver Award 2009
Re: More Pictures of ViciousV6
Wow, that looks great! Did you make all your own AN fittings? I am looking to do the same. Were did you get all your fittings and the kit to do that?
Thanks
Wow, that looks great! Did you make all your own AN fittings? I am looking to do the same. Were did you get all your fittings and the kit to do that?
Thanks
Flyin Ryan
hated cuz he drives fords
Re: More Pictures of ViciousV6
that's hot
that's hot
ViciousV6
400HP/550FTLB
Re: More Pictures of ViciousV6
Well i bought all the fitting from Summit and local Performance shop. The best tool i ever bought was the -an hose cutters from Summit work so much nicer than a cut-off wheel and the fittings slide right on after making every cut. Also get a roll of strapping tape which works best for holding the braid while cutting it.
Yes i have cut and made all my own lines and must say i have enough -an and odd fittings to do more projects since you never know which way you need your fittings to turn and run. The trans cooler has been moved for the 3rd time now.
Ralph
ViciousV6
QWERTYphoon said:
Well i bought all the fitting from Summit and local Performance shop. The best tool i ever bought was the -an hose cutters from Summit work so much nicer than a cut-off wheel and the fittings slide right on after making every cut. Also get a roll of strapping tape which works best for holding the braid while cutting it.
Yes i have cut and made all my own lines and must say i have enough -an and odd fittings to do more projects since you never know which way you need your fittings to turn and run. The trans cooler has been moved for the 3rd time now.
Ralph
ViciousV6
Don W.
Stab it and steer it
Re: More Pictures of ViciousV6
Tell ya what, I'd get rid of that tie-down. Put together one of these last year while my mounts were still broke. Worked for maybe 2 passes, straightened that puppy right out, and my truck is stock. Other that that, that is a sweet build.:tup:
Tell ya what, I'd get rid of that tie-down. Put together one of these last year while my mounts were still broke. Worked for maybe 2 passes, straightened that puppy right out, and my truck is stock. Other that that, that is a sweet build.:tup:
ViciousV6
400HP/550FTLB
Re: More Pictures of ViciousV6
I have the ability to install solid mounts but you feel alot for vibs and stuff from the engine so urethanes with this tiedown which is rated for 3,000 lbs will never be hurt the truck is pushing over 700hp and it hasn't done nothing with it in a year.
Thanks for the comments.
Ralph
ViciousV6
Don W. said:
I have the ability to install solid mounts but you feel alot for vibs and stuff from the engine so urethanes with this tiedown which is rated for 3,000 lbs will never be hurt the truck is pushing over 700hp and it hasn't done nothing with it in a year.
Thanks for the comments.
Ralph
ViciousV6
ViciousV6
400HP/550FTLB
Re: More Pictures of ViciousV6
Well we are looking forward once i get tired of this set-up we will be going to a GT42 BB Turbo so we are making sure everything is big enough to handle that turbo. **Just got no money to buy that turbo right now** So we are thinking of 3 1/2 downpipe with electric cut-out and 60mm wastegate.
Should be ready for that in the next week or two.
Ralph
ViciousV6
cloned 1 said:
Well we are looking forward once i get tired of this set-up we will be going to a GT42 BB Turbo so we are making sure everything is big enough to handle that turbo. **Just got no money to buy that turbo right now** So we are thinking of 3 1/2 downpipe with electric cut-out and 60mm wastegate.
Should be ready for that in the next week or two.
Ralph
ViciousV6