DIY alky/meth kits

skipztt

skipztt

boost
has anyone done a alky/meth injection homemade kit? if so post pics and what you had to buy to make your kit.

what all do you really need? i know you need a pump......etc and all. but what kind of nozzle (maybe an old nos Nozzle?!) is best and you need some sort of check valve also..right?


should i make my own or buy razor's , snow performance, turbonetics kits instead


anyone have a link to a page that shows you how to make a kit. that would help also
thanks in advance
 
Flyin Ryan

Flyin Ryan

hated cuz he drives fords
Re: DIY alky/meth kits

skipztt said:
anyone have a link to a page that shows you how to make a kit. that would help also
thanks in advance
Click to expand...

This was really big over on the www.turbobuick.com forum.. might want to look under the alky/meth section.. ton's of great info there also
 
gjp

gjp

another post whore
Re: DIY alky/meth kits

After looking at my new razor kit I now am glad I did not try to make one myself. Kit looks complete and for the cost vs the time I saved, its worth buying a complete kit. :2cents:
 
skipztt

skipztt

boost
Re: DIY alky/meth kits

ok. i think im gonna get razors kit. ive been looking at it for a while now.

i meet a guy with a syclone and he had a homemade kit on but it looked like crap. anyway he has a program caled ostrich? :( ........and he runs 20 psi. stock motor and everything.

is this possible? or is he asking for trouble?
 
Flyin Ryan

Flyin Ryan

hated cuz he drives fords
Re: DIY alky/meth kits

skipztt said:
ok. i think im gonna get razors kit. ive been looking at it for a while now.

i meet a guy with a syclone and he had a homemade kit on but it looked like crap. anyway he has a program caled ostrich? :( ........and he runs 20 psi. stock motor and everything.

is this possible? or is he asking for trouble?
Click to expand...


Ostrich is a emulator and allows you to change around your tune on the fly without having to reburn a new chip each time.. really an awsome piece and can be had at http://www.moates.net/ostrich-real-time-ecm-emulator-p-57.html

You wouldn't need this to run 20psi on a stock motor.. you can crank the boost up all you want but that doesn't mean the motor will last :)

Also I wouldn't try making your own alky kit personally.. I'd get the razor kit or a progressive kit from http://www.coolingmist.com who have a really nice progressive kit and it's not as pricey imo.
 
You must log in or register to reply here.
Top