KB headers, engine, aeromotive A1000, tranny/oil coolers

H-TOWN-TYPHOON

H-TOWN-TYPHOON

You're killin' me, Smalls
PLEASE KEEP ALL DEALS IN THIS THREAD. WILL HONOR TIME STAMP FOR POSTS IN THIS THREAD ONLY, NOT PMs.


Aeromotive A1000 fpr w/autometer sending unit installed. Mounted on sheet metal bracket.

130 shipped

xdruyo.jpg


Kenne Bell headers with wastegate flange installed on crossover. T4 flange. Bought from Dean for a song, will pass the deal on to another member.
*ORIGINALLY LISTED AS ATR. HAVE SINCE REALIZED THAT THEY ARE IN FACT KENNE BELL*
600 shipped.

3" Downpipe with vband fitting. 2 bungs welded in

275 shipped

~10k mile syty long block with vortec heads. Broken rocker arm stud, but an easy fix. TRW pistons installed when it was owned by Branden (QUICK STORM).

SOLD

NOTE: I WILL THROW IN PINK PLASTIC CUP ON THE FLOOR PLUS THE CHILDREN'S BOOK FOR FREE TO THE PERSON THAT BUYS THE ENGINE/HEADERS/DOWNPIPE TOGETHER

21luaeg.jpg


23m09dj.jpg


1430pbl.jpg


Chris Keith hand fabbed valve covers. Vortec style center bolt with the notch to clear accessories. $150
Complete with the hand print of a 4 year old.

1e52xu.jpg



Oil/Tranny cooler combo made to mount in factory intercooler location. One pusher and one puller fan. Wiring and plugs intact. Purchased from Ed Hess when I was accumulating parts from the worlds fastest SYTY.

$150 shipped

2rhxx05.jpg


2ij0aq.jpg
 
Last edited:
Injected1

Injected1

Member
Re: ATR headers, engine, aeromotive A1000, tranny/oil coolers

Re: ATR headers, engine, aeromotive A1000, tranny/oil coolers

Interested in valve covers. price shipped to 32541?
 
B

bjeeper04

big jeep little truck
Re: ATR headers, engine, aeromotive A1000, tranny/oil coolers

Re: ATR headers, engine, aeromotive A1000, tranny/oil coolers

For a song? I'll sing for those headers!
 
Syclone#2960

Syclone#2960

What ever it takes!!
Re: ATR headers, engine, aeromotive A1000, tranny/oil coolers

Re: ATR headers, engine, aeromotive A1000, tranny/oil coolers

I think those headers are Kenne Bell's.
 
H-TOWN-TYPHOON

H-TOWN-TYPHOON

You're killin' me, Smalls
Re: ATR headers, engine, aeromotive A1000, tranny/oil coolers

Re: ATR headers, engine, aeromotive A1000, tranny/oil coolers

Syclone#2960 said:
I think those headers are Kenne Bell's.
Click to expand...

Well, crap.

Let me go out and see if they have tags on 'em or are stamped on the flanges.

EDIT: THESE ARE KENNE BELL HEADERS, NOT ATR
 
Last edited:
ffmeltdown

ffmeltdown

Donating Member
Re: KB headers, engine, aeromotive A1000, tranny/oil coolers

Eric, where are you located? I couldnt find it in your signature.

Respectfully,
Tom
 
dgoodhue

dgoodhue

BuSTeD 4.3
Re: KB headers, engine, aeromotive A1000, tranny/oil coolers

H-Town is typical reference to Houston, TX
 
D

djwaggoner

New member
Re: KB headers, engine, aeromotive A1000, tranny/oil coolers

Hey Eric,
I need that AFPR - if I could just figure out what that fitting on the bottom does?
Is that the return line?
TNX
 
H-TOWN-TYPHOON

H-TOWN-TYPHOON

You're killin' me, Smalls
Re: KB headers, engine, aeromotive A1000, tranny/oil coolers

djwaggoner said:
Hey Eric,
I need that AFPR - if I could just figure out what that fitting on the bottom does?
Is that the return line?
TNX
Click to expand...

One side in, one side to the engine. The flat piece is a plug that can either go in the side or the bottom.

Sy#2661 said:
H-Town is typical reference to Houston, TX
Click to expand...

:werd: I'm right outside of Houston.

I would be willing to drive (within reason) and meet some of the other Texas/LA guys for the engine.
 
F

firetird

New member
Re: KB headers, engine, aeromotive A1000, tranny/oil coolers

I will take the long block. I am in Austin. How close can you meet me?

Thanks,
Bobby Strehler
 
F

firetird

New member
Re: KB headers, engine, aeromotive A1000, tranny/oil coolers

Also, can you give me some more info on the specs of the long block (stock bore, good oil pressure, any work needed other than mentioned)? Are the pistons forged? Sorry if I ask any stupid questions but I am new to the SY/TY's!

Thanks,
Bobby Strehler
 
H-TOWN-TYPHOON

H-TOWN-TYPHOON

You're killin' me, Smalls
Re: KB headers, engine, aeromotive A1000, tranny/oil coolers

firetird said:
Also, can you give me some more info on the specs of the long block (stock bore, good oil pressure, any work needed other than mentioned)? Are the pistons forged? Sorry if I ask any stupid questions but I am new to the SY/TY's!

Thanks,
Bobby Strehler
Click to expand...

around 10k block. TRW forged pistons, comp cam (412 or 420, I don't remember) new timing assembly, vortec heads were supposed to have been rebuilt (rocker arm broken upon installation by former owner.)

I haven't been inside to look around. I came across the engine for the same price that I am asking and thought it was a good price. Haven't done anything with it in a year, so I figured that I would pass it on to someone else.

I had planned to take it to a machine shop for a once over before installation and would still recommend that the next owner do the same if not fully competent in engine assemblies.

I can drive to meet you, wouldn't be a problem. I'm off till next monday, so any time until then would be fine.
 
F

firetird

New member
Re: KB headers, engine, aeromotive A1000, tranny/oil coolers

So, as far as you know, everything is in good shape? The motor never burned oil, smoked, or knocked? I will still drop it off at the machine shop for inspection but I don't want to have to replace crank, rods, or pistons.

Thanks,
Bobby Strehler
512.745.0932
 
Injected1

Injected1

Member
Re: KB headers, engine, aeromotive A1000, tranny/oil coolers

pass on the valve covers for now. gonna modify mine instead.

thanks, nick
bump
 
MRKING

MRKING

New Parts for Old Trucks
Re: KB headers, engine, aeromotive A1000, tranny/oil coolers

To bad the motor is local only ...
 
You must log in or register to reply here.
Top