LIL QIK
HELL YEA I GOT BOOST!
Several Sy/Ty pieces for sell. All prices DO NOT include shipping. I will ship with whatever preference you have as long as it trackable. You will pay actual shipping. No shipments to Canada or overseas. I've read too many horror stories on here. All these were aquired for a Ty that I was going to build but ended up getting rid of the Ty. So Figure someone may be able to use them. Please do not PM me the "dibbs". Please keep it all public. Any other info or pics that are needed....just let me know....I'll answer the best that I can. None of these items are boxed yet incase someone needs more pics or something. So please be patient. Once payment is recieved I'll do everything I can to get them shipped within a day or two. Thanks for looking.....
Paypal is lilqik@yahoo.com
RPM Stainless Headers w/ factory T3 Flange. Factory turbo location with Vortec Heads Used......800.00 [size=+2].......SOLD[/size]
These are Hackings old headers that I gave him 1300 for. They arrived with an array of dents in the primaries. Jaime was nice enough to offer the money back....but I went ahead and kept them due to possible use in another project. Never used them but heated up the primaries to work the dents out. They are shown in the pics. Oh...and they are coated. If I remember correctly....you have to use solid motor mounts with these.
PTE67 BB Turbo (T3 Flange) New / Never Used........700.00 [size=+2].......SOLD[/size]
RPM 3.5" PTE Stainless Downpipe w/ 35mm Tial Wastegate. New but Modified..
......500.00 [size=+2].......SOLD - Pending Payment[/size]
This downpipe was made by Mike Lee as I requested a 3.5" DP with dual O2 bungs. I ended up getting rid of the Typhoon before it was ever used. Decided to try it in another application.....but ended up getting rid of that as well. In essence I'm just selling the first section of DP w/ wastegate...but including the sections that I cut off for shits and giggles. Figure it would be easy enough for someone to weld them back in.
Unknown Propshaft...... 100.00
This propshaft was on the Sylcone when I bought it. It looks beefier than the one that was on my Typhoon so I can only assume it may be someone's aftermarket. But I don't know which. If anyone can identify it....it would be greatly apprecieated.
Complete Intake Manifold Setup..........Used...400.00 [size=+2].......SOLD[/size]
This was taken off my Syclone and hasn't been touched since. Can't really tell you anything about it except that it is complete.
Upper and Lower Intake Manifold with Fue Rail.......Used.....275.00 [size=+2].......SOLD[/size]
Factory Turbo w/ Wastegate.......Used.......100.00 [size=+2].......SOLD[/size]
This was off the Syclone when I bought it. Now the Syclone had over 200K on it but if I remember right it was a fresh rebuild on the motor when the kid blew it up shortly after getting it back on the road. Doesn't surprise me considering the puck is welded up. I'm not a turbo expert....but am inclined to believe that this turbo is in good shape or has some sort of rebuild on it. It's tight front to back and side to side and spins freely.
Prompaq Setup......100.00 obo
I know they were quite expensive at one time....but they could be overrated junk now. Who knows! But I figure someone may want to try it out.
Accel 6.32 DFI........used.......200.00
I bought this from Dean a good while back with anticipation of using it on the Ty....but ofcourse never did. Comes with communication cable and the software. The disc also have a couple of programs on them....but you'd have to figure them out for your self. Dean couldn't even remember what each program was, only that the last time he use it....it was either 40# or 50# injectors and he was in the 11's.
Factory Lower Heat Exchanger Complete......50.00
This is off the Syclone I'm building. Can't testify to what's good or bad on it being that I've never used it.
20 (dont ask).... High Impedance 60# (@ 43psi) or 70# (@ 60psi) Injectors.......New....40.00 each. [size=+2].......6 LEFT[/size]
I bought these from RPM a good while back at 60.00 each. I moved to a bigger injector before I ever used them. These are what a lot of people call the slim line injector and are designed for the higher pressures. Here's a link to these injectors that I bought in case there are any questions. They have never had fuel run to them or fired on.....but have been installed into the manifold. http://www.sytyperformance.com/inde...facturer_id=0&option=com_virtuemart&Itemid=26
Paypal is lilqik@yahoo.com
RPM Stainless Headers w/ factory T3 Flange. Factory turbo location with Vortec Heads Used......800.00 [size=+2].......SOLD[/size]
These are Hackings old headers that I gave him 1300 for. They arrived with an array of dents in the primaries. Jaime was nice enough to offer the money back....but I went ahead and kept them due to possible use in another project. Never used them but heated up the primaries to work the dents out. They are shown in the pics. Oh...and they are coated. If I remember correctly....you have to use solid motor mounts with these.
PTE67 BB Turbo (T3 Flange) New / Never Used........700.00 [size=+2].......SOLD[/size]
RPM 3.5" PTE Stainless Downpipe w/ 35mm Tial Wastegate. New but Modified..
......500.00 [size=+2].......SOLD - Pending Payment[/size]This downpipe was made by Mike Lee as I requested a 3.5" DP with dual O2 bungs. I ended up getting rid of the Typhoon before it was ever used. Decided to try it in another application.....but ended up getting rid of that as well. In essence I'm just selling the first section of DP w/ wastegate...but including the sections that I cut off for shits and giggles. Figure it would be easy enough for someone to weld them back in.
Unknown Propshaft...... 100.00
This propshaft was on the Sylcone when I bought it. It looks beefier than the one that was on my Typhoon so I can only assume it may be someone's aftermarket. But I don't know which. If anyone can identify it....it would be greatly apprecieated.
Complete Intake Manifold Setup..........Used...400.00 [size=+2].......SOLD[/size]
This was taken off my Syclone and hasn't been touched since. Can't really tell you anything about it except that it is complete.
Upper and Lower Intake Manifold with Fue Rail.......Used.....275.00 [size=+2].......SOLD[/size]
Factory Turbo w/ Wastegate.......Used.......100.00 [size=+2].......SOLD[/size]
This was off the Syclone when I bought it. Now the Syclone had over 200K on it but if I remember right it was a fresh rebuild on the motor when the kid blew it up shortly after getting it back on the road. Doesn't surprise me considering the puck is welded up. I'm not a turbo expert....but am inclined to believe that this turbo is in good shape or has some sort of rebuild on it. It's tight front to back and side to side and spins freely.
Prompaq Setup......100.00 obo
I know they were quite expensive at one time....but they could be overrated junk now. Who knows! But I figure someone may want to try it out.
Accel 6.32 DFI........used.......200.00
I bought this from Dean a good while back with anticipation of using it on the Ty....but ofcourse never did. Comes with communication cable and the software. The disc also have a couple of programs on them....but you'd have to figure them out for your self. Dean couldn't even remember what each program was, only that the last time he use it....it was either 40# or 50# injectors and he was in the 11's.
Factory Lower Heat Exchanger Complete......50.00
This is off the Syclone I'm building. Can't testify to what's good or bad on it being that I've never used it.
20 (dont ask).... High Impedance 60# (@ 43psi) or 70# (@ 60psi) Injectors.......New....40.00 each. [size=+2].......6 LEFT[/size]
I bought these from RPM a good while back at 60.00 each. I moved to a bigger injector before I ever used them. These are what a lot of people call the slim line injector and are designed for the higher pressures. Here's a link to these injectors that I bought in case there are any questions. They have never had fuel run to them or fired on.....but have been installed into the manifold. http://www.sytyperformance.com/inde...facturer_id=0&option=com_virtuemart&Itemid=26
Last edited:
