front brake hoses
- Thread starter i8av8
- Start date
Re: front brake hoses
forgot to mention i did bleed the brakes twice. rr>lr>rf>lf.
i heard the ss lines made for a stiffer pedal but i would imagine it would only werk if the brakes are already stopping properly. i was going to buy regular lines from autozone but now i will look into the ss. if that's not it then the m cylinder then booster i guess. thanks a bunch!
forgot to mention i did bleed the brakes twice. rr>lr>rf>lf.
i heard the ss lines made for a stiffer pedal but i would imagine it would only werk if the brakes are already stopping properly. i was going to buy regular lines from autozone but now i will look into the ss. if that's not it then the m cylinder then booster i guess. thanks a bunch!
Re: front brake hoses
you know where i can find the lines from frame to wheel. i already have the abs delete and all that. just looking for frame to wheel, not a kit, if it exists.
you know where i can find the lines from frame to wheel. i already have the abs delete and all that. just looking for frame to wheel, not a kit, if it exists.
SCWolverine
New member
Re: front brake hoses
If you're just looking for the rubber line (with the bracket that mounts to the upper a-arm), and nothing special, any parts store should have them. They're like $12-$13 at O'reillys around here...
If you're just looking for the rubber line (with the bracket that mounts to the upper a-arm), and nothing special, any parts store should have them. They're like $12-$13 at O'reillys around here...
sy#2716
SyTy 4 Life
Re: front brake hoses
go to summitt and you can get them. blk00z28 just ordered some for his truck. He can telly ou the part number. i dont remember becasue it has been over 5 years ago from when i did my brakes. I did a lot though. baer brakes up front, ss lines, 5/8 wheel cylinders, aluminum drums, abs delete then a little over a year ago i went o hydroboost and now it is rock hard. You would not belive the braking power now.
go to summitt and you can get them. blk00z28 just ordered some for his truck. He can telly ou the part number. i dont remember becasue it has been over 5 years ago from when i did my brakes. I did a lot though. baer brakes up front, ss lines, 5/8 wheel cylinders, aluminum drums, abs delete then a little over a year ago i went o hydroboost and now it is rock hard. You would not belive the braking power now.
blk00z28
Forced to by choice
Re: front brake hoses
http://www.syty.net/forums/showthread.php?t=71153
I ordered the 25 kit, I'll let you know what it comes with, as well as fitment shortly when I go to install it on the rear. If it comes with the front lines, I'll go ahead and put them on to see if they fit too and update the link I posted above.
http://www.syty.net/forums/showthread.php?t=71153
I ordered the 25 kit, I'll let you know what it comes with, as well as fitment shortly when I go to install it on the rear. If it comes with the front lines, I'll go ahead and put them on to see if they fit too and update the link I posted above.
Re: front brake hoses
thought that too, but pedal is just too soft. think i'll start with that kit 7225 if it werks out for you. very interested in it.
if you could, please keep us posted. thank you :tup:
thought that too, but pedal is just too soft. think i'll start with that kit 7225 if it werks out for you. very interested in it.
if you could, please keep us posted. thank you :tup:
Re: front brake hoses
whoa, whoa, whoa!, what is that? you just opened a new can of beans for me. never seen those or even heard of those clips before.
who ever did the brakes before i bought the ty had them set up pretty bad @$$. stopped on a dime and the pads were below specs, even. so i did a pad swap w/new cross drilled/slotted rotors and the pedal felt like poo. months later did new pads(thinking that was the problem) and new calipers for the pulling.
bleeding the system went normal. could hear all the air coming out of the new calipers. flow seemed to be normal.
and yes, i do have the abs delete. i didn't do it, it was already done before me.
where can i find this bleeder kit and does it have instructions?
Are you getting good flow from the fronts when you bleed them?
And you have done the ABS delete?
If yes on the delete, but not real good flow when you bleed the fronts, you have to use the clips on the combination valve while bleeding.
whoa, whoa, whoa!, what is that? you just opened a new can of beans for me. never seen those or even heard of those clips before.
who ever did the brakes before i bought the ty had them set up pretty bad @$$. stopped on a dime and the pads were below specs, even. so i did a pad swap w/new cross drilled/slotted rotors and the pedal felt like poo. months later did new pads(thinking that was the problem) and new calipers for the pulling.
bleeding the system went normal. could hear all the air coming out of the new calipers. flow seemed to be normal.
and yes, i do have the abs delete. i didn't do it, it was already done before me.
where can i find this bleeder kit and does it have instructions?
blk00z28
Forced to by choice
Re: front brake hoses
The 25 kit came today. It looks like it should work.
Now, I don't know why there are 3 different kits. The only thing that I could see would be different would be the block fitting holes might be a different size. Which I won't actually know until I go to install them. But the kit comes with the front two line, and the rear from the frame down to the rear.
Now, I just need to find hard lines from the drums to this hard line.
The 25 kit came today. It looks like it should work.
Now, I don't know why there are 3 different kits. The only thing that I could see would be different would be the block fitting holes might be a different size. Which I won't actually know until I go to install them. But the kit comes with the front two line, and the rear from the frame down to the rear.
Now, I just need to find hard lines from the drums to this hard line.