alwayscode390
pppssssshhhhhtttttttttttt
Hey Guys, I will take money order if you have feedback on here, or paypal. I will pay the paypal fees. I ship with UPS , it includes $100 of insurance and tracking. If you want more insurance its $2 per $100 in extra coverage. Just add it to your payment. THANKS---
1.
This is a set of Stainless Steel Headers made by ATR for the Syclone/Typhoon. These are not made anymore. A lot of these headers have cracks or welded up cracks. These headers have NEVER been cracked. They have been sent off to Jet Hot for application of their BEST coating. The 2000 degree coating. That option was over $400 alone!!! The coating keeps underhood temps LOW , and keeps the heat heading to the turbo for quicker spool. Approximately 8k miles on these headers.
There are NO dents, but there are some minor scrapes and scratches in the coating. These headers are in a TIGHT FIT when under the hood, so thats what caused the scratches.
Comes with both headers and the crossover pipe. The crossover pipe has two band clamps that will be included in the auction also.
Retail: $1200 + shipping and tax + $400 coating = $1600 + shipping twice and tax
PRICE: $1100 shipped
2.
This is a set of USED Custom Fabricated Sheetmetal Tall Valve Covers. These will work with any center bolt cover 4.3 (using the l-35, lb4, or vortec heads). Clears most if not all rocker arm combinations. Usually when you buy these new you have to drill your own holes, but each cover has 1 pre drilled hole. The side I was using for PCV has a rubber grommet attached, and the other side can be used for an oil fill hole (you need to buy a cap). Has the stepped fronts to allow for the alternator brackets to clear.
Comes with all 6 mounting bolts. These are used, and have minor scratches on the sides from being in a tight engine situation. Nothing major, and no dents.
Retail: $310 + shipping/tax
PRICE: SOLD
3.
USED Innovative Turbo Progate. The ProGate wastegate provides the ultimate in control, flexibility, and extreme durability. Rigorous testing has proven these units to be the new benchmark in wastegate performance. Tested to over 900HP, this is the highest flowing wastegate by ITS. The ProGate (42mm valve) features:
· A Billet Stainless Steel Valve – Large one-piece design eliminates breakage!
· A Billet Stainless Steel center-section and Valve Guides – No Corrosion Problems!
· A Billet Aluminum top – Looks great, Adjustable too!
· A reinforced Fluorocarbon Full-Rolling Diaphragm for complete valve actuation and precise control!
· A precision cast iron valve body with a high-temperature ceramic coating! – Takes the heat and still looks great!
· All Stainless Steel Hardware for durability and appearance!
Retail: $500+ shipping and tax
PRICE: $200 shipped
This item has a SMALL chip in it above the word "innovative" on the top, and minor scratches from being stuffed down in tight spaces where the exhaust goes.
4.
This is a NEW modified Syclone oil pan for the 4.3 that now holds 7 quarts of oil. It was TWO oil pans that were cut and welded together to make a deep pan. The welds are clean, and the paint is new and shiny. It does NOT have the drain plug, but your stock one will fit right in. Has the oil hole for the turbo. Sits 2" lower than stock.
Retail of two pans is $200 +shipping/tax + fab work. Fabbed pans cost $650+ shipping/tax.
PRICE: SOLD
5.
This is a NEW BadlanzHPE Electric Exhaust Cutout. Comes with Black Painted Y-Pipe and 3" cutout.
Y-Adapter is 11" long and is made of 16 gauge steel. Comes with 10ft of wiring harness, switch, gasket, hardware, and instructions.
Designed for IN LINE installation, with minimal exhaust restriction ... very high flowing design.
Retail: $180+ shipping/tax same brand on Ebay ; $200+ for any one Summit Sells
PRICE: $160 shipped
1.
This is a set of Stainless Steel Headers made by ATR for the Syclone/Typhoon. These are not made anymore. A lot of these headers have cracks or welded up cracks. These headers have NEVER been cracked. They have been sent off to Jet Hot for application of their BEST coating. The 2000 degree coating. That option was over $400 alone!!! The coating keeps underhood temps LOW , and keeps the heat heading to the turbo for quicker spool. Approximately 8k miles on these headers.
There are NO dents, but there are some minor scrapes and scratches in the coating. These headers are in a TIGHT FIT when under the hood, so thats what caused the scratches.
Comes with both headers and the crossover pipe. The crossover pipe has two band clamps that will be included in the auction also.
Retail: $1200 + shipping and tax + $400 coating = $1600 + shipping twice and tax
PRICE: $1100 shipped
2.
This is a set of USED Custom Fabricated Sheetmetal Tall Valve Covers. These will work with any center bolt cover 4.3 (using the l-35, lb4, or vortec heads). Clears most if not all rocker arm combinations. Usually when you buy these new you have to drill your own holes, but each cover has 1 pre drilled hole. The side I was using for PCV has a rubber grommet attached, and the other side can be used for an oil fill hole (you need to buy a cap). Has the stepped fronts to allow for the alternator brackets to clear.
Comes with all 6 mounting bolts. These are used, and have minor scratches on the sides from being in a tight engine situation. Nothing major, and no dents.
Retail: $310 + shipping/tax
PRICE: SOLD
3.
USED Innovative Turbo Progate. The ProGate wastegate provides the ultimate in control, flexibility, and extreme durability. Rigorous testing has proven these units to be the new benchmark in wastegate performance. Tested to over 900HP, this is the highest flowing wastegate by ITS. The ProGate (42mm valve) features:
· A Billet Stainless Steel Valve – Large one-piece design eliminates breakage!
· A Billet Stainless Steel center-section and Valve Guides – No Corrosion Problems!
· A Billet Aluminum top – Looks great, Adjustable too!
· A reinforced Fluorocarbon Full-Rolling Diaphragm for complete valve actuation and precise control!
· A precision cast iron valve body with a high-temperature ceramic coating! – Takes the heat and still looks great!
· All Stainless Steel Hardware for durability and appearance!
Retail: $500+ shipping and tax
PRICE: $200 shipped
This item has a SMALL chip in it above the word "innovative" on the top, and minor scratches from being stuffed down in tight spaces where the exhaust goes.
4.
This is a NEW modified Syclone oil pan for the 4.3 that now holds 7 quarts of oil. It was TWO oil pans that were cut and welded together to make a deep pan. The welds are clean, and the paint is new and shiny. It does NOT have the drain plug, but your stock one will fit right in. Has the oil hole for the turbo. Sits 2" lower than stock.
Retail of two pans is $200 +shipping/tax + fab work. Fabbed pans cost $650+ shipping/tax.
PRICE: SOLD
5.
This is a NEW BadlanzHPE Electric Exhaust Cutout. Comes with Black Painted Y-Pipe and 3" cutout.
Y-Adapter is 11" long and is made of 16 gauge steel. Comes with 10ft of wiring harness, switch, gasket, hardware, and instructions.
Designed for IN LINE installation, with minimal exhaust restriction ... very high flowing design.
Retail: $180+ shipping/tax same brand on Ebay ; $200+ for any one Summit Sells
PRICE: $160 shipped
Last edited:
(lb4 heads) ---
