Engine Tiedown's/ Torque strap Interest.....

nallj92

nallj92

Active member
Alright.

I have most everything lined up to do these again. Im looking for a list of who would be interested. They are going to be 65 dollars including shipping again. Prices of things went up a bit but i still can swing these at this price.

Little info: When brake boosting or launching the syty engine torques up alot. The stock truck even will lift the engine with good stock mounts at least 3 inches. Worn or broken mounts, the engine will lift up so high that the alternator fan will even cut the upper radiator hose and sometimes the downpipe will contact the frame. If you have ever had your own hood open and brake boosted at least 5-10 PSI you would see how much they move.

This bracket takes about 15-20 minutes to install and will elimnate the engine movement.
This is a great alternative to a broken mount due to the intensive labor to replace them. This is a cheaper alternative than replacing with solid mounts also.
The tiedown is fully adjustable to how tight you want to have your engine, you can set it snug or you can even proload the engine a bit.
I will be adding a nut for the turnbuckle so that it will not have a chance to spin loose at all.

Features:
-brackets are CNC cut
-Clear anodized ( as shown in pics)
- can also have them sent out bare alum for people to polish (let me know if that is you)
- Uses a washered body bolt to attached to frame
- Detailed instructions

n6601292_30981370_9674.jpg

n6601292_30981368_9120.jpg

n6601292_30981371_9939.jpg

n6601292_31050265_1012.jpg

n6601292_31050267_1528.jpg


List:
psmvchaser 1 anodized PAID Shipped
SYO237 1anodized PAID Shipped
Rookie 1 bare PAID
Daryl H 1 anodized PAID Shippped
13Pelle 1 PAID Shipped
BoosedSUV 1PAID Shipped
mmvic 1 anodized PAID Shipped
Autovation 1 PAID SHIPPED
95xtreme 2 anodized - SLACKER
dalwine250 1PAID Shipped
turbodig 1PAID Shipped
sy777 2 anodized
GAShan 2 barePAID Shipped
attakdog 1 anodized
wheels 1PAID Shipped
lavaman 1 anodized PAID Shipped
osmosis 1
#0441 3 PAID Shipped
kraus 1 bare PAID Shipped
HARMON 1 PAID Shipped
jollygreen1964 2 anodized PAID Shipped
UK-TY 1 anodized PAID Shipped
92TYPHOON937 1 anodized PAID Shipped
toomanytoys 1 anodized PAID Shipped
syty9933 1 PAID Shipped
fabricator 1 bare PAID Shipped
yudlose 1PAID Shipped

after these are gone i will have 18 left

If there are any mistakes let me know, IF YOU DO NOT SPECIFY BARE YOU WILL GET ANODIZED!! i had 15 bare made once they are gone all that is left is bare.

Again, 65 dollars shipped.
paypal to
jcnall@mtu.edu

PM for check or MO address


Post here if your interested so I can get a list going. I am going to need at least 25 people interested before starting to make these.

Thanks

Justin
 
Last edited:
Daryl H

Daryl H

Donating Member
Re: Engine Tiedown's/ Torque strap Interest.....

I love GP. Sign me up for one. Anodized.
 
Last edited:
nallj92

nallj92

Active member
Re: Engine Tiedown's/ Torque strap Interest.....

alright getting there. also note if you want them bare alum or the anodized like shown....
 
BoostedSUV

BoostedSUV

Active member
Re: Engine Tiedown's/ Torque strap Interest.....

put me in for one... the $55 price on the last GP would be more appealing
 
nallj92

nallj92

Active member
Re: Engine Tiedown's/ Torque strap Interest.....

BoostedSUV said:
put me in for one... the $55 price on the last GP would be more appealing
Click to expand...

sorry going to stick with the 65, thats what i charged last time, i just sold the last couple for 55. cant do that anymore,


no price difference its same cost either way for bare or not
 
95xtreme

95xtreme

New member
Re: Engine Tiedown's/ Torque strap Interest.....

turbodig said:
C'mon, just think how nice that polished tie-down would look on Rus-ty..

Mark me down for one too, Justin.
Click to expand...

What was that saying about polishing a turd:rotf: The truck not the brackets they are quite nice.:tup:
 
You must log in or register to reply here.
Top