Syclone intake/fuel rails/throttle body

M

mackeral5

New member
Since the previous ad didn't seem to get any interest I'll try this again, slightly different package with a lower price.....

Stock Syclone upper/lower intake. Powder coated black with a GMC log cnc machined plate on top. EGR block off. includes intake air temp and coolant temp sensors.

Red anodized fuel rails with Accel 32# injectors. these have never seen any fuel.

CSI billet t-stat housing and CSI billet distributor hold down, both anodized red.

Lokar stainless throttle/cruise/TV cables with billet bracket.

BBK 52mm throttle body with Thunder racing billet cover. includes tps and iac.

$650 shipped to the lower 48 or BEST OFFER.

I can be reached at 706.587.8111.

thanks, Mike.

etc_143.jpg

etc_144.jpg

etc_142.jpg
 
1

1BADV6

Donating Member
Re: Syclone intake/fuel rails/throttle body

Mike,

I would be interested in the t-stat housing and distributor hold down if you want to sell them separate. I'll give you $50 for both shipped to 18929.

thanks,
 
BoostedSUV

BoostedSUV

Active member
Re: Syclone intake/fuel rails/throttle body

I would be interested in the throttle body, and perhaps the fuel rails and lokar cables if you are looking to part it out. I just had my upper intake coated and my lower is for vortec heads so I don't need the rest. Let me know
 
1madgumby

1madgumby

New member
Re: Syclone intake/fuel rails/throttle body

if that cable bracket works for the 700R in interested in that. how much if so?
 
M

mackeral5

New member
Re: Syclone intake/fuel rails/throttle body

throttle body and lokar cable setup sold pending funds to boostedSUV. I'll work on prices to part out the rest. thanks.
 
1

1BADV6

Donating Member
Re: Syclone intake/fuel rails/throttle body

1BADV6 said:
Mike,

I would be interested in the t-stat housing and distributor hold down if you want to sell them separate. I'll give you $50 for both shipped to 18929.



Yes.... No ????

thanks,
Click to expand...
 
M

mackeral5

New member
Re: Syclone intake/fuel rails/throttle body

Parted out with prices:

Billet fuel rails with Aeromotive AFPR, guage, and lines. You will need the AN to GM adapter fittings if you aren't running AN all the way to the tank.I believe Summit/Speedway/Jegs/etc sell them. On my setup I ran AN to the tank. $300 shipped to the lower 48 OBO.

etc_145.jpg


Lower intake powder coated black. no damaged threads. $250 shipped to the lower 48 OBO.

etc_146.jpg

etc_147.jpg


Upper intake, powder coated black with EGR blockoff and CNC'd GMC logo. GMC logo can be removed if desired, it is mounted with 4 bolts. bolt holes would have to be plugged or filled. EGR port in base of upper is tapped 3/8 NPT so you can plug it if you like. no damaged threads. $175 shipped to the lower 48 OBO.

etc_149.jpg

etc_150.jpg

etc_148.jpg
 
M

mackeral5

New member
Re: Syclone intake/fuel rails/throttle body

The lower intake, throttle body, lokar cables, and csi t-stat housing/dist hold down are gone.

I'm open to reasonable offers/trades for the upper intake and fuel rail/regulator setup.

I really want a center console/floor shifter that will work well in a '91 4dr jimmy, preferably dark gray or black in color, if anyone is interested in a trade let me know.

thanks.
 
BoostedSUV

BoostedSUV

Active member
Re: Syclone intake/fuel rails/throttle body

That fuel rail setup is a really nice setup! Now I'm wishing I jumped on them with the throttle body even though it would have been a little extra work... Good luck with the sales! You probably made out better selling everything in pieces. Did you get the tb/ cables shhipped yet?
 
Last edited:
M

mackeral5

New member
Re: Syclone intake/fuel rails/throttle body

Boosted---it's boxed and sitting at the shop ready for pickup tomorrow.

I hope someone comes along with a center console/shifter, I'd rather work that trade than get the $$$$....
 
BoostedSUV

BoostedSUV

Active member
Re: Syclone intake/fuel rails/throttle body

sounds good, I am looking forward to getting it. I wish I could help you out with the center console. Good luck with the sale and or trade. I'll be in touch.
 
TYTILIDIE

TYTILIDIE

METH HEAD
Re: Syclone intake/fuel rails/throttle body

Are the rails painted red? If not, where did you get them anodized?
 
cloneman315

cloneman315

Active member
Re: Syclone intake/fuel rails/throttle body

I pmed on the t stat and throttle body the sec it hit the board I was told it was not getting parted,now it is and the parts are sold...
 
M

mackeral5

New member
Re: Syclone intake/fuel rails/throttle body

the rails are anodized red, force efi made them and had them anodized. this was several years ago...they machined the rails, then anodized so they are totally anodized.

on the tstat housing, etc, I'm sorry about that. there was no interest in the complete setup so after several days I realized the only way to sell would be to part it all out in another add......my mistake for not remembering your pm.
 
TYTILIDIE

TYTILIDIE

METH HEAD
Re: Syclone intake/fuel rails/throttle body

Hey Mike, just trying to figure out what is going on. On the 16th I asked you about the rails and regulator in which you accepted my offer on the 17th. You said you would ship out Monday. Then you said you would ship in a few days. I have sent you a couple PM's and I see you have been on since those PM's were sent and I haven't heard anything. Are we still on or do you not want to sell me this stuff? I need to know. TIA.

Mike
 
M

mackeral5

New member
Re: Syclone intake/fuel rails/throttle body

check pms, the parts will go out this week. some unexpected issues came up last week. i apologize for the delay. thanks again.
 
You must log in or register to reply here.
Top